Parts for Mercury Marine 500 Distributor Adaptor & Pilot Assembly
Tap to zoom. Scroll down to order.
Reference numbers in this diagram can be found in a light blue row below — scroll down to order.
#1 | 393-2799A19 | DISTRIBUTOR ASSEMBLY, COMPLETE (SEE PAGE 11 FOR BREAKDOWN) (1 required per assembly) |
393-2799A19 - Distributor, NLA [ More info ] Unavailable |
||
#2 | 45391 | SPACER, IGNITION WIRE (1 required per assembly) |
#3 | 33-45191 | SPARK PLUG (CHAMPION - L19V) (4 required per assembly) |
33-45191 - SPARK PLUG Note: Priced Individually [ More info ] Unavailable |
||
33-57451 - 3397180Q [ More info ] Unavailable |
||
33-97180 - NGK BUHW Note: Priced Individually [ More info ] Unavailable |
||
33-97180Q - NGK Spark Plug Buhw - Priced Individually [ More info ] Unavailable |
||
33-896329827 - Spark Plug - L76V - Priced Individually [ More info ] Unavailable |
||
L76V - Champion Spark Plug ( #827M) [ More info ]
$9.99 $6.63 |
||
#4 | 30109 | GROUND STRAP, DISTRIBUTOR TO CRANKCASE (1 required per assembly) |
30109 - Ground Strap, NLA [ More info ] Unavailable |
||
#5 | 10-26548 | SCREW, DISTRIBUTOR GROUND STRAP TO TAB BRACKET (3/8") (1 required per assembly) |
10-26548 - Screw - Priced Individually [ More info ] Unavailable |
||
#6 | 26551 | BRACKET, TAB - CRANKCASE SCREW - DISTRIBUTOR GROUND STRAP (1 required per assembly) |
53-78201 - Clip [ More info ] Unavailable |
||
#7 | 45-47953 | DRIVE SHAFT, DISTRIBUTOR (1 required per assembly) |
45-47953 - Drive Shaft, NLA [ More info ] Unavailable |
||
#8 | 46242A 1 | PILOT ASSEMBLY, DISTRIBUTOR (1 required per assembly) |
#9 | 10-48291 | SCREW, DISTRIBUTOR PILOT TO DISTRIBUTOR (1 1/8") (4 required per assembly) |
10-56396 - Screw - Priced Individually [ More info ] Unavailable |
||
#10 | 24-27944 | SPRING, HORSESHOE (1 required per assembly) |
24-27944 - Spring, Horseshoe - Disributor Housing,NLA [ More info ] |
||
#11 | 17-27962 | PIN, SPRING TERMINAL (1 required per assembly) |
#12 | 48103A 1 | ECONOMIZER COLLAR AND PIN ASSEMBLY (1 required per assembly) |
#13 | 17-27961 | PIN, SPRING RETAINER (1 required per assembly) |
#14 | 22-25094 | FITTING, GREASE - ECONOMIZER COLLAR (1 required per assembly) |
#15 | 38230A 1 | THROTTLE ACTUATOR ASSEMBLY (1 required per assembly) |
#16 | 23-26602 | BUSHING, NYLON - THROTTLE ACTUATOR (1 required per assembly) |
#17 | 10-46420 | SCREW, THROTTLE ACTUATOR TO SECTOR GEAR (2 required per assembly) |
10-46420 - Screw, NLA [ More info ] Unavailable |
||
#18 | 12-46246 | WASHER, DISTRIBUTOR PILOT TO DISTRIBUTOR ADAPTOR (1 required per assembly) |
#19 | 30043A 1 | ADAPTOR, DISTRIBUTOR (1 required per assembly) |
#20 | 10-22040 | SCREW, ADAPTOR AN PILOT TO CRANKCASE (3 required per assembly) |
#21 | 12-20084 | WASHER, ADAPTOR AND PILOT TO CRANKCASE SCREW (3 required per assembly) |
#22 | 11-20083 | NUT, ADAPTOR AND PILOT TO CRANKCASE SCREW (3 required per assembly) |
11-20083 - Nut, Starter Solenoid Terminal (5/16X24) [ More info ] |
||
#24 | 12-27939 | WASHER, THRUST - DISTRIBUTOR ADAPTOR (1 required per assembly) |
#25 | 30-20066 | BEARING, BALL - DISTRIBUTOR ADAPTOR (1 required per assembly) |
#26 | 14-27960 | TAB WASHER, CAP LOCKING (1 required per assembly) |
#27 | 13-27959 | WASHER, WAVE - TAB WASHER TENSION (1 required per assembly) |
#28 | 27955 | CAP, ADAPTOR AND PILOT FASTENING (1 required per assembly) |
#29 | 23-29909 | SPACER, DRIVEN PULLEY (1 required per assembly) |
#30 | 29906A 1 | DRIVEN PULLEY ASSEMBLY (1 required per assembly) |
#31 | 17-29908 | PIN, DRIVEN PULLEY (1 required per assembly) |
#32 | 29907 | FLANGE, DRIVEN PULLEY (1 required per assembly) |
#33 | 28-29910 | KEY, DISTRIBUTOR DRIVING (1 required per assembly) |
#34 | 10-29911 | SCREW, PULLEY CLAMPING (1 required per assembly) |
10-29911 - Screw - Priced Individually [ More info ] Unavailable |
||
#35 | 13-26996 | LOCKWASHER, PULLEY CLAMPING SCREW (1 required per assembly) |
#36 | 20140 | BELT, TIMING (1 required per assembly) |
#37 | 46251 | PLATE, THROTTLE STOP (1 required per assembly) |
#38 | 23-48456 | SPACER, THROTTLE PLATE TO ADAPTOR (1 required per assembly) |
#39 | 10-31299 | SCREW, THROTTLE STOP PLATE TO DISTRIBUTOR ADAPTOR (7/8") (2 required per assembly) |
10-31299 - Screw - Priced Individually [ More info ] Unavailable |
||
#40 | 10-46311 | SCREW, THROTTLE STOP ADJUSTING (1 1/2") (2 required per assembly) |
#40 | 10-21504 | SCREW, THROTTLE STOP ADJUSTING (1 1/4") (1 required per assembly) |
#41 | 25-46252 | GROMMET, THROTTLE STOP ADJUSTING SCREW (3 required per assembly) |
25-46252 - GROMMET,NLA [ More info ] Unavailable |
||
#42 | 26852 | CAP, NYLON - THROTTLE STOP ADJUSTING SCREW (3 required per assembly) |
#43 | 27947 | SWIVEL, LINKAGE - ECONOMIZER COLLAR (1 required per assembly) |
#44 | 25996A 1 | SWIVEL AND LINK ROD ASSEMBLY (1 required per assembly) |
#45 | 11-25168 | NUT, UPPER LINK ROD ADJUSTING (1 required per assembly) |
#46 | 37700 | ROD, LINK - UPPER (1 required per assembly) |
#47 | 27948 | SWIVEL, UPPER LINK ROD TO THROTTLE CONTROL LEVER (1 required per assembly) |
#48 | 12-29245 | WASHER, UPPER SWIVEL TO THROTTLE LEVER (1 required per assembly) |
12-8M0204649 - WASHER Note: Priced Individually [ More info ] |
||
#49 | 11-20586 | NUT, SWIVEL TO THROTTLE LEVER (1 required per assembly) |
11-35045 - Nut (1/4-28) [ More info ] Unavailable |
||
#50 | 37688 | LEVER, THROTTLE CONTROL (1 required per assembly) |
37688 - LEVER [ More info ] Unavailable |
||
53143A 2 - Lever Assembly [ More info ] Unavailable |
||
#51 | 10-34613 | SCREW, THROTTLE LEVER TO EXHAUST COVER (1 required per assembly) |
10-34613 - Screw, NLA [ More info ] Unavailable |
||
#52 | 12-29395 | WASHER, THROTTLE LEVER SCREW (2 required per assembly) |
#53 | 23-29529 | BUSHING, THROTTLE LEVER SCREW (1 required per assembly) |
23-29529 - Bushing, NLA [ More info ] Unavailable |
||
#54 | 24-37934 | SPRING, QUICK DISCONNECT - THROTTLE CABLE TO THROTTLE LEVER (1 required per assembly) |
24-37934 - Spring, Quick Disconnect - Shift Cable,NLA [ More info ] |
||
#55 | 10-38069 | SCREW, ANCHOR - QUICK DISCONNECT SPRING TO THROTTLE LEVER (1 required per assembly) |