Parts for Mercury Marine 500 Magneto Adaptor & Pilot Assembly
Tap to zoom. Scroll down to order.
Reference numbers in this diagram can be found in a light blue row below — scroll down to order.
#1 | 394-2271A 2 | MAGNETO ASSEMBLY, COMPLETE (4D-4) (1 required per assembly) |
394-2271A 2 - MAGNETO,NLA [ More info ] Unavailable |
||
#2 | 45-27951 | SHAFT, MAGNETO DRIVE (1 required per assembly) |
#3 | 39560A 1 | MAGNETO PILOT ASSEMBLY (1 required per assembly) |
#4 | 30-20066 | BALL BEARING, MAGNETO PILOT (1 required per assembly) |
#5 | 24-27944 | SPRING, HORSESHOE - MAGNETO PILOT (1 required per assembly) |
24-27944 - Spring, Horseshoe - Disributor Housing,NLA [ More info ] |
||
#6 | 17-27962 | PIN, ANCHOR - HORSESHOE SPRING TO PILOT (1 required per assembly) |
#7 | 12-29245 | WASHER, HORSESHOE SPRING TO ANCHOR PIN (1 required per assembly) |
12-8M0204649 - WASHER Note: Priced Individually [ More info ] |
||
#8 | 27946A 1 | ECONOMIZER COLLAR AND PIN ASSEMBLY (1 required per assembly) |
#9 | 17-27961 | PIN, ECONOMIZER COLLAR - SPRING RETAINER (1 required per assembly) |
#10 | 22-25094 | FITTING, GREASE - ECONOMIZER COLLAR (1 required per assembly) |
#11 | 38230A 1 | THROTTLE ACTUATOR ASSEMBLY (1 required per assembly) |
#12 | 23-26602 | BUSHING, NYLON - THROTTLE ACTUATOR (1 required per assembly) |
#13 | 10-46420 | SCRW, THROTTLE ACTUATOR TO ECONOMIZER COLLAR (2 required per assembly) |
10-46420 - Screw, NLA [ More info ] Unavailable |
||
#14 | 30043 | ADAPTOR, MAGNETO (1 required per assembly) |
30043 - Adaptor [ More info ] Unavailable |
||
#16 | 12-27939 | WASHER, MAGNETO PILOT (1 required per assembly) |
#17 | 14-27960 | TAB WASHER, ADAPTOR CAP FASTENING (1 required per assembly) |
#18 | 13-27959 | WASHER, WAVE - MAGNETO BALL BEARING TENSION (1 required per assembly) |
#19 | 27955 | CAP, MAGNETO ADAPTOR AND PILOT FASTENING (1 required per assembly) |
#20 | 27947 | SWIVEL, LINKAGE - ECONOMIZER COLLAR (1 required per assembly) |
#21 | 25996A 1 | SWIVEL AND LINK ROD ASSEMBLY (1 required per assembly) |
#22 | 11-25168 | NUT, UPPER LINK ROD ADJUSTING (1 required per assembly) |
#23 | 37700 | ROD, LINK - UPPER (1 required per assembly) |
#24 | 27948 | SWIVEL, UPPER LINK ROD TO THROTTLE CONTROL LEVER (1 required per assembly) |
#25 | 37688 | LEVER, THROTTLE CONTROL (1 required per assembly) |
37688 - LEVER [ More info ] Unavailable |
||
53143A 2 - Lever Assembly [ More info ] Unavailable |
||
#26 | 10-34613 | SCREW, THROTTLE LEVER TO EXHAUST COVER (1 required per assembly) |
10-34613 - Screw, NLA [ More info ] Unavailable |
||
#27 | 12-29395 | WASHER, THROTTLE LEVER SCREW (2 required per assembly) |
#28 | 23-29529 | BUSHING, THROTTLE LEVER SCREW (1 required per assembly) |
23-29529 - Bushing, NLA [ More info ] Unavailable |
||
#29 | 24-37934 | SPRING, QUICK DISCONNECT - THROTTLE CABLE TO THROTTLE LEVER (1 required per assembly) |
24-37934 - Spring, Quick Disconnect - Shift Cable,NLA [ More info ] |
||
#30 | 10-38069 | SCREW, ANCHOR - QUICK DISCONNECT SPRING TO THROTTLE LEVER (1 required per assembly) |
#31 | 10-30110 | SCREW, ADAPTOR AND PILOT TO MAGNETO (4 required per assembly) |
#32 | 10-22040 | SCREW, ADAPTOR AND PILOT TO CRANKCASE (3 required per assembly) |
#33 | 12-20084 | WASHER, ADAPTOR AND PILOT TO CRANKCASE SCREW (3 required per assembly) |
#34 | 11-20083 | NUT, ADAPTOR AND PILOT TO CRANKCASE SCREW (3 required per assembly) |
11-20083 - Nut, Starter Solenoid Terminal (5/16X24) [ More info ] |
||
#35 | 28-28657 | KEY, MAGNETO DRIVING (1 required per assembly) |
#36 | 29784 | HUB, DRIVEN PULLEY (1 required per assembly) |
#37 | 29783A 1 | DRIVEN PULLEY ASSEMBLY (1 required per assembly) |
#38 | 17-24873 | PIN, ROLL - FLANGE LOCATING (2 required per assembly) |
#39 | 29785 | FLANGE, DRIVEN PULLEY (1 required per assembly) |
#40 | 12-20138 | WASHER, PULLEY CLAMPING SCREW (1 required per assembly) |
#41 | 10-29240 | SCREW, PULLEY CLAMPING (1 required per assembly) |
10-29240 - Screw - Priced Individually [ More info ] Unavailable |
||
#42 | 20140 | BELT, TIMING (1 required per assembly) |
#43 | 29277 | PLATE, THROTTLE STOP (1 required per assembly) |
29277 - PLATE [ More info ] Unavailable |
||
#44 | 10-24933 | SCREW, THROTTLE STOP ADJUSTING (1 1/2") (2 required per assembly) |
10-24933 - Screw, NLA [ More info ] Unavailable |
||
#44 | 10-20012 | SCREW, THROTTLE STOP ADJUSTING (1 5/8") (1 required per assembly) |
#45 | 11-20088 | NUT, THROTTLE STOP ADJUSTING SCREW (2 required per assembly) |
#45 | 11-20013 | NUT, THROTTLE STOP ADJUSTING SCREW (1 required per assembly) |
#46 | 26852 | CAP, NYLON - ADJUSTING SCREW (3 required per assembly) |
#47 | 10-29197 | SCREW, THROTTLE STOP PLATE TO ADAPTOR (2 required per assembly) |
10-29197 - Screw/LockWasher [ More info ] Unavailable |
||
#48 | 37996 | GROUND STRAP, THROTTLE STOP PLATE SCREW (1 required per assembly) |
#50 | 11-20586 | NUT, UPPER SWIVEL TO THROTTLE LEVER (1 required per assembly) |
11-35045 - Nut (1/4-28) [ More info ] Unavailable |
||
#51 | 33-39635 | SPARK PLUG (4 required per assembly) |
33-39635 - SPARK PLUG - Priced Individually [ More info ] Unavailable |
||
33-82371M - NGK B7HS - Priced Individually [ More info ] Unavailable |
||
33-8M0114739 - Spark Plug B7HS-82 - Priced Individually [ More info ] |
||
#52 | 20119 | PROTECTOR, SPARK PLUG (4 required per assembly) |
20119 - Protector , Priced Individually [ More info ] Unavailable |
||
20119A 1 - Protect Assembly - Priced Individually [ More info ] Unavailable |
||
47604A 1 - Protector Assembly , Priced Individually [ More info ] Unavailable |
||
85-71006A 1 - Protector - Priced Individually [ More info ] Unavailable |
||
85-63709A 1 - Boot Kit - Black - Priced Individually [ More info ] |
||
#53 | 23564 | CABLE, HIGH TENSION LEAD - SPARK PLUG (4 required per assembly) |
23564 - 23564A10 [ More info ] Unavailable |
||
23564A10 - LEAD ASSY [ More info ] Unavailable |
||
52615A 1 - Lead Assembly [ More info ] Unavailable |
||
84-813706A46 - Cable Assembly [ More info ] Unavailable |
||
#54 | 25-25429 | "O" RING, HIGH TENSION LEAD CABLE TO END CAP COVER (4 required per assembly) |
25-25429 - O-Ring, High Tension Lead Cable,NLA [ More info ] |
||
#55 | 54-25231 | CLIP, HARNESS LEADS TO MAGNETO (1 required per assembly) |
54-25231 - Clip, NLA [ More info ] Unavailable |
||
#56 | 10-20401 | SCREW, LEAD CLIP TO MAGNETO (1 required per assembly) |
#57 | 22789 | "D" WASHER, CLIP FASTENING SCREW (1 required per assembly) |
22789 - C Washer - Priced Individually [ More info ] Unavailable |
||
69205 - C Washer [ More info ] Unavailable |
||
#58 | 394-1134A 1 | GROUND STRAP ASSEMBLY, MAGNETO TO CRANKCASE (1 required per assembly) |
#59 | 32-37694 | SLEEVE, HIGH TENSION LEAD (3") (2 required per assembly) |
32-37694 - SLEEVE [ More info ] Unavailable |
||