TT2000 - PTT System 3-Wire Mercury Replaces Mercury 3-Ram 3-Wire 1985-95
|
  |
Your Price
$999.00
Available to Order SPEEDY DELIVERY
30-DAY RETURN
FULL WARRANTY
Part Number
TT2000
Manufacturer
SEI Marine
TT2000 - Power Tilt & Trim System 3-Wire Mercury Replaces Mercury 3-Ram 3-Wire 1985-95
From the API Marine division of SEI.
Design I Side Fill and Design II Aft Fill
Comes with relay harness to convert from 2 wire motor to 3 wire system. API# WH476
*** Note: In twin engine applications BOTH trim/tilt units should be replaced at the same time so the speed of travel on both units is identical. ***
These come in an anodized finish. If you wish to paint it the manufacturer recommends zinc oxide primer followed by your top coat.
All SEI Trim Tilt systems are factory filled with Automatic Transmission Fluid (Type Dexron III) and cycled 25-35 cycles to Bleed any air from the system. The Trim Tilt system is under pressure and ready to be install when you receive them.
The API warranty on this Power Tilt and Trim unit is 12 months (not 3 years).
Replaces Mercury parts:
818186A6
826729A4
SEI Marine Tt2000 - Ptt System 3-wire Mercury Replaces Mercury 3-ram 3-wire 1985-95 is equivalent to parts:
- 8M0168223 Mercury Marine
- 826729A10 Mercury Marine
- 826729A09 Mercury Marine
- 826729A08 Mercury Marine
- 826729A07 Mercury Marine
- 826729A4 Mercury Marine
SEI Gearcases & Complete Outdrives
SEI Complete Trim & Tilt Units
SEI is the largest manufacturer of aftermarket sterndrives and outboard lower units in the world. Every SEI complete gearcase and outdrive carries a 3-Year No-Fault Warranty. SEI also manufactures complete tilt and trim uints as well as shafting and other individual parts. Their subsidiary company API Marine manfuactures a quality line of aftermarket outboard starter and trim motors.
TT2000 - Power Tilt and Trim System 3-Wire Mercury Replaces Mercury 3-Ram 3-Wire 1985-95 From the API Marine division of SEI. Design I Side Fill and Design II Aft Fill Comes with relay harness to convert from 2 wire motor to 3 wire system. API# WH476 *** Note: In twin engine applications BOTH trim/tilt units should be replaced at the same time so the speed of travel on both units is identical. *** These come in an anodized finish. If you wish to paint it the manufacturer recommends zinc oxide primer followed by your top coat. All SEI Trim Tilt systems are factory filled with Automatic Transmission Fluid (Type Dexron III) and cycled 25-35 cycles to Bleed any air from the system. The Trim Tilt system is under pressure and ready to be install when you receive them. The API warranty on this Power Tilt and Trim unit is 12 months (not 3 years). Replaces Mercury parts:818186A6826729A4
999.00
This site is protected by reCAPTCHA and the Google Privacy Policy and Terms of Service apply.