90-218-AS - SE218 Lower Unit Mercury 3.0L, 1.75 to 1, Stub Shaft, Counter Rotation
|
  |
Your Price
$1,395.00
Available to Order SPEEDY DELIVERY
30-DAY RETURN
FULL WARRANTY
Part Number
90-218-AS
Manufacturer
SEI Marine
See Recommended Installation Components below.
90-218-AS - SE218 Lower Unit Mercury 3.0L, 1.75 to 1, Stub Shaft, Counter Rotation
- Part Number : 90-218-AS
- Rotation : LH
- Gear Ratio : 1.75:1
- Gear Tooth Count : 12/21
- Shaft Length : 20", 25" or 30"
- Driveshaft Spline Count : 8 or 13
OE#: 822442A53
If you have an 8 Spline drive shaft you will need to buy the stub shaft unit and purchase an upper driveshaft separately:
- 45-824114A 1 - Drive Shaft Extension Kit 20"
- 45-823901A 1 - Drive Shaft Extension Kit 25"
- 45-824115A 1 - Drive Shaft Extension Kit 30"
The SEI 216 gear cases are supplied with the correct water tube coupling for units with a serial number of OG438000 and higher. If your unit has a lower serial number, you will need to use your old water coupling or purchase the correct part (SEI part number 96-116-12K).
IMPORTANT NOTE: See additional image above for driveshaft length measurement procedure.
Related Items
SEI Marine 90-218-as - Se218 Lower Unit Mercury 3.0l, 1.75 To 1, Stub Shaft, Counter Rotation is equivalent to parts:
- 857113T2 Mercury Marine
- 1623857113T 2 Mercury Marine
SEI Gearcases & Complete Outdrives
SEI Complete Trim & Tilt Units
SEI is the largest manufacturer of aftermarket sterndrives and outboard lower units in the world. Every SEI complete gearcase and outdrive carries a 3-Year No-Fault Warranty. SEI also manufactures complete tilt and trim uints as well as shafting and other individual parts. Their subsidiary company API Marine manfuactures a quality line of aftermarket outboard starter and trim motors.
See Recommended Installation Components below. 90-218-AS - SE218 Lower Unit Mercury 3.0L, 1.75 to 1, Stub Shaft, Counter Rotation Part Number : 90-218-AS Rotation : LH Gear Ratio : 1.75:1 Gear Tooth Count : 12/21 Shaft Length : 20", 25" or 30" Driveshaft Spline Count : 8 or 13 OE#: 822442A53 If you have an 8 Spline drive shaft you will need to buy the stub shaft unit and purchase an upper driveshaft separately: 45-824114A 1 - Drive Shaft Extension Kit 20" 45-823901A 1 - Drive Shaft Extension Kit 25" 45-824115A 1 - Drive Shaft Extension Kit 30" The SEI 216 gear cases are supplied with the correct water tube coupling for units with a serial number of OG438000 and higher. If your unit has a lower serial number, you will need to use your old water coupling or purchase the correct part (SEI part number 96-116-12K). IMPORTANT NOTE: See additional image above for driveshaft length measurement procedure.
1,395.00
This site is protected by reCAPTCHA and the Google Privacy Policy and Terms of Service apply.