90-216-B25 - SE 216, 1.62:1, 25'' Drive Shaft
|
  |
Your Price
$0.00
Part Number
90-216-B25
Manufacturer
SEI Marine
90-216-B25 - Lower Unit Mercury 3.0L, 1.62 to 1, 25'' Driveshaft
SE216 Series Gearcases replace most Mercury 3.0L Models.
- Part Number : 90-216-B25
- Rotation : RH
- Gear Ratio : 1.62:1
- Gear Tooth Count : 17/28 or 13/21
- Shaft Length : 25"
- Driveshaft Spline Count : 13
IMPORTANT NOTE: See additional image above for driveshaft length measurement procedure.
SE216 Replaces most Mercury 3.0L Lower Units (SN 1B504989 and below). Does not replace the Torque Master, Torque Master 2 or the Sport Master.
Uses 13 Spline one-piece drive shaft.
If you have an 8 Spline drive shaft, you will need to buy the stub shaft unit and buy an OEM upper driveshaft 25" 45-823901A 1 if available. Copy part number 45-823901A 1 into our search box to check.
The SEI 216 gear cases are supplied with the correct water tube coupling for units with a serial number of OG438000 and higher. If your unit has a lower serial number, you will need to use your old water coupling or buy the correct part (SEI part number 96-116-12K).
Related Items
SEI Gearcases & Complete Outdrives
SEI Complete Trim & Tilt Units
SEI is the largest manufacturer of aftermarket sterndrives and outboard lower units in the world. Every SEI complete gearcase and outdrive carries a 3-Year No-Fault Warranty. SEI also manufactures complete tilt and trim uints as well as shafting and other individual parts. Their subsidiary company API Marine manfuactures a quality line of aftermarket outboard starter and trim motors.
90-216-B25 - Lower Unit Mercury 3.0L, 1.62 to 1, 25'' Driveshaft SE216 Series Gearcases replace most Mercury 3.0L Models. Part Number : 90-216-B25 Rotation : RH Gear Ratio : 1.62:1 Gear Tooth Count : 17/28 or 13/21 Shaft Length : 25" Driveshaft Spline Count : 13 IMPORTANT NOTE: See additional image above for driveshaft length measurement procedure.SE216 Replaces most Mercury 3.0L Lower Units (SN 1B504989 and below). Does not replace the Torque Master, Torque Master 2 or the Sport Master.Uses 13 Spline one-piece drive shaft.If you have an 8 Spline drive shaft, you will need to buy the stub shaft unit and buy an OEM upper driveshaft 25" 45-823901A 1 if available. Copy part number 45-823901A 1 into our search box to check.The SEI 216 gear cases are supplied with the correct water tube coupling for units with a serial number of OG438000 and higher. If your unit has a lower serial number, you will need to use your old water coupling or buy the correct part (SEI part number 96-116-12K).
0.00
This site is protected by reCAPTCHA and the Google Privacy Policy and Terms of Service apply.