Well, I definitely appreciate your kindness and patience in walking me through the steps to figure this out! Same to you. If you are in seattle area, drop me a line and I’ll take you out!
Real
Well, thanks again for your kindness and patience in walking me through all these steps. I love learning new things, and slightly demystifying motors has been pretty cool(though my tool collection is getting out of hand!) Let me know if you are up in Seattle area and I will take you out!
This is the boat the motor lives on. Its kind of a cool story, if you want to hear it.
I was on tour. My wife was having dinner at our friends house. She calls me and says " they have a boat we can have!" I asked here 2 questions: "Does it run" "Is the floor solid?". She answered yes to both. When I got home, I saw a completely destroyed boat. It had the original 1955 Evinrude on it..Wasn't frozen, but barely alive. Floor was rotten, stringer and transom were rotten. The hull had tons of patches over gelcoat where they had used various epoxies and such and then just painted over it.
I remember getting pretty pissed as it sat in our driveway. Like a lot of my "hobbies" they start out of necessity. It was either haul it to the dump and pay the $450 fee or try to find how to get it running. I had NO IDEA what I was in for.
Really long story short, having never done any of these before, I tore everything out, and figured out, with a ton of research, how to build better stringers, a solid transom, good floor with improved fiberglass from original, and re-gelcoated the whole hull. That was the most insane of all of it. Gelcoat is weird stuff and if you don't have the right tools(in my case mostly cheap chinese tools) it is a series of orders harder.
I made so many mistakes along the way, redid quite a bit of it. I ended up having to build a garage to store it in, and then a couple of winters ago, enclosed the garage so I could re-gelcoat the hull, as my first time hadn't really stuck.
I rebuilt the Evinrude lower end, got into the engine a bit, and got it running. I was getting pretty crazy on the restore when my commercial fishing buddy came over and talked some sense into me. He said that unless I wanted to work on the motor constantly I should get something newer. I didn't have money for a new motor, so found a '88 merc TOP 115(also the kicker) for a pretty good price. I rebuilt carbs and fuel pump and redid the timing. She's been a great motor for me! A little finicky to start, but runs pretty damn well, all said. I take really good care of her, and know at some point she will have to be retired. Ive done my best to keep her clean, but have a trim motor thats about to rust through and some bolts that if I try to take them off would definitely be going to a machine shop.
We've had a lot of fun on her, and now I got my little trolling motor back!
Ian