Logo
FULL SITE MENU

Search results

  1. S

    1965 Evinrude 3hp confusion about the high speed needle

    hello everyone, I recently picked up a 1965 3hp evinrude. It runs but roughly so I went to rebuild the carb and it has the strangest high speed idle screw setup I have ever seen. I'm soaking the carb now. I have rebuilt many of this style of carb but never one that has this setup. My...
  2. S

    58 Evinrude Lark poor idle and won't get to full speed

    Hi everyone, I have a 1958 Evinrude Lark 35hp that I have been working on for a while now. last year I was able to get it running though not very well. So, this year I have been really trying to get it going well. the problem: The motor will start and run for about 20 minutes then it will...
  3. S

    Stuck Pistons/power head replacement

    hello Everyone, I recently was given a 1973 4hp evinrude (Model number 4306). the motor is stuck. I pulled it apart to see how bad it was. It is rusted very badly inside the powerhead. I would like to replace the powerhead. I'm looking to find out what years powerheads will work for a...
  4. S

    1958 Evinrude Lark 35hp Ignition wiring

    Hello Everyone, I'm wondering if anyone can help me with wiring in a new ignition switch. I have a 1958 Evinrude Lark 35hp with a 3 position 4 terminal ignition switch and I went to the boat store today excited that I might be able to finally get this motor started today. I bought a 6...
  5. S

    1958 Evinrude Lark 35hp hard to turn over

    Hi everyone, Over the winter I rebuilt a 1958 Evinrude Lark 35. I bought the manuals and followed them through the rebuild procedure. I have everything back together now and am just about ready to hook up gas and test the motor in a tank. The motor is still on a stand for the time being...
  6. S

    1958 Evinrude Lark 35hp model Number 35514

    Hi everyone, I'm restoring a 1958 Evinrude Lark 35hp. This is the first outboard I've every tried to restore. As I have been going through and cleaning all the individual engine parts, I have run into some issues. The main issues I'm struggling with right now is that the wiring harness is...
  7. S

    1970 60hp Johnson Outboard shifting problems

    Hi All, I've was able to narrow down a previous shifting problem to the solenoid in the lower unit. I tracked down some parts and replaced the solenoid but destroyed the paper gasket while taking it off. I didn't have another gasket but did have some Permatex gasket maker. Due to my...
  8. S

    1970 60hp Johnson stuck in forward

    Hi everyone, I am a first timer here. I bought a boat and it ran great all last year. This year I cleaned the carbs and when I took it out to adjust it I managed to get it running smoothly. I stopped to do a little fishing and when I tried to start it the battery was to dead to start it. It...
Back
Top