Logo
FULL SITE MENU

Search results

  1. T

    1986 evinrude tilt pump problem

    I have a 1986 40 hp evinrude motor AE40ELCDE with the tilt pump mounted on the right hand side.( it is the original pump.) not many models came out with this pump. There is no problem going up or down but it does not stay up it gradually goes back down with its own weight may take 2 or 3...
  2. T

    1986 Evinrude lower unit issue

    hi again ive ordered a seal kit for 86 Evinrude 40hp.lower unit ive undun the bolts on the lower unit but i cant seem to find where to undo the shift lever around the power head can any one tell me where it is loated model of motorl( e40elcde) thank you all Tony
  3. T

    1986 evinrude 40 hp water in gearbox re issue

    i wrote an article a few weeks back on oil from around the prop .I drained out the oil and a little bit of water came out first so i have to replace the 2 bottom seals ive taken off the prop and i can see the end seal what is the best way to take out the seals do i need to take out the propeller...
  4. T

    1986 Evinrude noticed oil around the propellor

    hi out there ive got a 1986 evinrude e40elcde its been sitting in the shed for about 3 monthsand the motor been tilted half way up i lowered the motor down to give it a run and i noticed a bit of oil driped out from around the propellor about 3 table spoons the oil.It was very clean and it...
  5. T

    1986 noticed oil around the propellor gearbox oil issue

    hi out there ive got a 1986 evinrude e40elcde its been sitting in the shed for about 3 months been tilted half way up i lowered the motor down to give it a run and i noticed a bit of oil driped out from around the propellor about 3 table spoons the oil.It was very clean and it smelt more like...
  6. T

    evinrude tilt re issue

    Evinrude tilt query hi I posted a thread last week with no response at all I thought ide place another thread with an extra photo of the tilt pump some smart bugger out there must recognise it. I got an 86 Evinrude 40 hp I took out the Manuel let down valve on my tilt to replace...
  7. T

    Evinrude tilt query

    hi I've got an 86 Evinrude I took out the Manuel let down valve on my tilt to replace it with a new kit p/no 0173260 which I purchased from Sea Way Marine it is a Talon Ind tilt pump mounted on the RHS of the motor this pump only came out on the 1986 and 1987 motors. When I screwed it...
  8. T

    tilt problem

    I posted an article a while back regarding my tilt on my 86 evinrude not staying up with no replies. Motor goes up ok but slowly goes back down. is any body familiar or seen this tilt or has any info.OR a diagram of the parts . or where I might be able to obtain a body gasket and parts IM not...
  9. T

    Tilt pump issue

    hi I have a slight problem with my tilt on my outboard works up an down ok but motor wont stay up gradually goes back down it is actually on a 1986 40hp evinrude and is mounted on the right hand side of motor . The cause of the problem is the check valve and the kit is no longer available...
  10. T

    evinrude 1986 tilt problem

    I posted an article last week regarding my tilt on my 86 evinrude not staying up with no replies. motor goes up ok but slowly goes back down. is any body familiar or seen this tilt before or has any info. that can help me. This tilt has one cylinder and is mounted on the right hand side of...
  11. T

    Evinrude 1986 With Talon Ind Tilt Query

    I have a 1986 Evinrude Motor with a Talon Ind Tilt that is working fine lifting and lowering the Outboard but it won't keep the outboard in the upright position for more then a few minutes. If anyone has any plans for the inside workinmgs for this tilt or know what could be causing the problem...
  12. T

    1986 evinrude tilt

    I have a 1986 Evinrude Motor having a slight problem with the tilt it works ok but the motor slowly goes down may take 5 mins to go right down . I have a special Tilt on the right hand side of the motor, model TALON IND and wondering if parts are still available and where can I obtain them from...
  13. T

    Info to change from vro to fuel pump only 1986 40 hp

    hi again i have a 40 hp 1986 evinrude my vro is faulty the oil side of the pump has been disconnected and i mix my own fuel i want to get rid of the VRO and replace it with a fuel pump only not a VRO i think OMC. have such a pump can any one advise me on part no. of the pump how to fit it and...
  14. T

    Fuel problem 1986 40HP evinrude

    "hi out there i have a 40hp ev "hi out there i have a 40hp evinrude 1986 model last time i used it was ok 6 weeks ago never had any problems before now it still starts up ok but to keep it running i have to pump up primer bulb at the tank. the little plastic fuel filter fills up straight away...
  15. T

    40 evinrude tilt quiries

    "i have a 40hp 1986 evinrude. "i have a 40hp 1986 evinrude. i have a question regarding the tilt. when i tilt the motor up to go in very shallow water, it slowly goes back down again even when i drive slow, is this normal or should it stay up when I'm driving slow? the tilt is mounted on the...
  16. T

    Mariner charging query

    i have a 2005 30hp mariner. th i have a 2005 30hp mariner. the battery volt at full throttle slowly goes up to 16.2v. and at idle goes back down to about 13v can any body tell me if this is normal as i have had my radio and depth sounder cook up. i would also think that this would cook my...
  17. T

    Primer solenoid problem

    "evinrude 40 hp1986 model had "evinrude 40 hp1986 model had problem with primer solenoid choke leaking when choke activated , replaced red manual valve which was cracked . this fixed the leaking problem i also replaced gasket and valve seat with new ones which where slightly different to the...
  18. T

    Evinrude manual

    "i perchesd a cd manual on eba "i perchesd a cd manual on ebay for my 40hp 86 evinrude. On the disc there are quite a few models, all different years and hundreds of pages.Also a lot of the pages are not quite clear to see can anybody tell me if there is a workshop manual in book form that...
  19. T

    Evinrude 40 hp primer soloniod

    "evinrude 40 hp 86 model had p "evinrude 40 hp 86 model had problem with primer solenoid choke leaking when choke activated , replaced red manual valve which fixed the leaking problem also replaced gasket and valve seat which where slightly different to the original one.Original ones where in 2...
Back
Top