Hello everyone I'm hoping i can get some help. I have a 1999 J25REEB 25 hp Johnson that i replaced the power pack 113-4767, charge coil 173-1670, sensor 133-3387 as well as the spark plugs ql77jc4 and spark plug wires. when i installed the parts and tested the spark jump it was really good. ran...
i have a johnson that has spark on first start up and run for about a minute then stalls out and when trying to restart it sputters then stalls.
when i check for spark there is none . the fuel pump works very well and the fuel lines are in great shape. i checked the coils and all three on both...
I have a Bay liner with a 3.0l Alfa 1 that the alarm is constant sounding. the engine runs great no leaks with oil fuel or water.
I can't seem to find out why the alarm is sounding off.
Has anyone ever had this issue the alarm is driving me insane lol
I have a Johnson 115 (J115GLEDR) that overheated on the starboard top cylinder. The weird thing is it only over heated on the one side
of the top cylinder. i have never seen anything like this before and I am wondering if anybody else has had this issue. I poked around in the water jackets
and...
hello im hoping someone can help me here on this issue. i have a 2002 90 hp mercury outboard that i am not getting spark on all three cylinders.
first i was missing spark on one of the cylinders changed coils and same thing. so i replaced the stator and all three have spark.
i moved the boat to...
I rebuilt the carbs on my 50 hp mercury 2 stroke and the top and middle work great how ever the bottom carb leaked so i removed and clean again and installed still leaks. so i removed the bottom bowl inspected the float and moves great with no sticking. installed and still leaks . I ordered...
i have an Evinrude 60 hp model E60TLCCR that i have done a lot of work on all gaskets have been changed head gaskets exhaust manifold gaskets and rebuilt carbs. i replaced the stator and power pack as well and when i put in the tank it runs like a champ but when the boat it put in the lake it...
i have a Johnson 200 model J200TXEOC that won't run with pushing the key switch in to choke the engine. i have rebuilt the carbs and installed new gaskets. how many turns is the idle mixture crew supposed to be turned out. any help would be great thanks.