Logo
FULL SITE MENU

Recent content by morobinson

  1. M

    Evinrude 1994 140hp

    Ok battery is charging now. As you've probably figured out i have no clue as to what im doing. When I put this motor on it's current boat all the wires from the ignition had been cut. I just spliced like wires back together for the most part and it started right up. I had 2 purple and 1 gray...
  2. M

    Evinrude 1994 140hp

    Replaced regulator/rectifier still only getting 12.7 volts on freshly charged battery regardless of rpms. Suggestions?
  3. M

    1994 evinrude 140hp v4 looper

    Can someone please verify that idle timing on 1994 evinrude 140hp v4 should be 4° before tdc
  4. M

    1994 evinrude 140hp v4 looper

    Will do thanks
  5. M

    1994 evinrude 140hp v4 looper

    With the multi meter set at 600ohms. Yellow to yellow from the stator 0.7ohms OL yellow to ground
  6. M

    1994 evinrude 140hp v4 looper

    And what should my multimeter be set at: 600, 6000, 60k etc.
  7. M

    1994 evinrude 140hp v4 looper

    Does the motor need to be running?
  8. M

    1994 evinrude 140hp v4 looper

    Ok. Will check later today. Thanks
  9. M

    1994 evinrude 140hp v4 looper

    Thanks. Do I have to disconnect to.get a valid test?
  10. M

    1994 evinrude 140hp v4 looper

    Cant get picture to load
  11. M

    1994 evinrude 140hp v4 looper

    While out testing the outboard/ fishing the other day. I travled about 2 miles at about 1/2 throttle to a fishing spot and it ran good. Fished for a couple hour. When going to test it back to the dock I started it and it died (still tweaking carbs) before i got underway. Went to restart and...
  12. M

    1994 evinrude 140hp s.l.o.w. feature

    Took the boat out this afternoon. At about 3/4 throttle ran great. On my way back to the ramp I opened it up to wot after about a mile or so it went into slow mode. Never trimmed up so I can rule that out
  13. M

    1994 evinrude 140hp s.l.o.w. feature

    The other 2 wires coming.from the trim plug at.the motor are white/brown and black/grey
  14. M

    1994 evinrude 140hp s.l.o.w. feature

    Not sure. Will look this afternoon
  15. M

    1994 evinrude 140hp s.l.o.w. feature

    Is it possible that the trimming the motor up could activate the s.l.o.w feature. Thinking back to when I was out testing on the water. I think i remember the motor having issues while trimming up. When installing the motor on it's current boat I think there was 5 wires coming from the trim...
See more
Back
Top