Logo
FULL SITE MENU

Recent content by gorantrener

  1. G

    swivel case/mount frame honda bf 225

    NSDON, simply it is very hard to steer. both hands full power required to steer the wheel. cable steering. everything ok with the cable, swivel case seems properly lubricated (old grease coming out from every hole it is supposed to go out), tried heating the old grease and nothing, so the core...
  2. G

    honda bf 225, strange overheat beep signal?

    ok will do, i have them, thanks!
  3. G

    swivel case/mount frame honda bf 225

    hi, it is cable steering. everything seems ok with the cable itself, also this tilt tube area seems ok, no rust, so i am allmost sure there is rust forming in the area where the lower bushings are, so that is why i think i will be forced to take apart mount rod (i mean steering rod) out from the...
  4. G

    swivel case/mount frame honda bf 225

    hi iang, thanks for the answer, when you say "powerhead", what do you mean? removing the engine from its lower mounting case completely?
  5. G

    honda bf 225, strange overheat beep signal?

    iang, thanks for the input. however, i allready did few important things (heat related), just before the season. which means, impeler change, thermostats change, and serious water jacket flushing with one european cleaner (it is called "ivero cleaner" in southern europe if you are familiar). my...
  6. G

    honda bf 225, strange overheat beep signal?

    chawk man, you are the man! thanks very much for the detailed help! i am somewhat familiar with the codes pulling procedures, but this was still more then helpfull. if it happens that there is problem with ECT, simple workaround to just simply try to disconnect wires leading to the ECT sensor is...
  7. G

    swivel case/mount frame honda bf 225

    hi, thanks for the answer. what i have to do is clean/lubricate/possibly change some parts of a mount frame - now inside swivel case. (tried everything else, but steering still very hard to do), so mount frame has to come out of a swivel case. so my idea would be to disconnect engine from the...
  8. G

    swivel case/mount frame honda bf 225

    hello every1. i need to take apart swivel case and mount frame on honda bf 225. when you unscrew 2 upper and lower bolts holding the engine and swivel case, only thing keeping the engine attached to the swivel case is the gear linkage rod. Any idea how to get around this without taking apart to...
  9. G

    honda bf 225, strange overheat beep signal?

    hello, please if someone has any idea, or at least is this normal behaviour for the control lights? so it is bf225, year 2010, is it possible that overheat light together with continuos buzzer (so classic overheat signal) turns on after just minute or two after starting the engine? i mean, can...
  10. G

    Honda 225 fuel starvation issue

    yeah i understood. thanks very much!
  11. G

    Honda 225 fuel starvation issue

    just wanted to ask, because i have similar problem, can you state what does WOT and VST stands for? thanks
  12. G

    bf 225, how to clean fuel injectors

    hi all, after other repairs i see i have to clean fuel injectors on bf 225. assume it is not an easy task, so any help is appreciated. first of all, i dont even see where they are located, and it seems as the biggest issue. please some starting help, thanks!!!
  13. G

    honda bf 225 (2012) fuel or injectors???

    hello, if some1 would help, important things first, all filters replaced (including HP), sparkplugs also, fuel line no issues, HP pump works fine at start. i have occasional problem somewhere in HP part or injectors... if i start the engine and run it up to 2000 rpm, never any issues. if i try...
See more
Back
Top