Logo
FULL SITE MENU

Recent content by Dam13n

  1. D

    1995 Evinrude Vindicator (E200CXEOC) Won't Plane

    OK, Here's the update from the weekend testing. Took the boat out and still would not get on plan. Decided to do some diagnostics while on the water and not on Muffs in the driveway. Unplugged the temperature sensors Brown Wires on both banks, retest and same issue. Unplug rectifier yellow...
  2. D

    1995 Evinrude Vindicator (E200CXEOC) Won't Plane

    Thanks for the response @faztbullet. Since it was starting up without issues, I did swap over the two 2 pin connectors (Brown Leads from Stator to Power Pack) she fired right up but hadn't had a chance to put it on the pond. I will this weekend and provide update.
  3. D

    1995 Evinrude Vindicator (E200CXEOC) Won't Plane

  4. D

    1995 Evinrude Vindicator (E200CXEOC) Won't Plane

    My Vindicator had a miss on top side and when checking components I found the Voltage regulator was bad. Voltage regulator was replaced with a new cdi unit. To get to the Voltage regulator, I had to remove the power pack. When putting the power pack back together I was uncertain which was the...
  5. D

    Timing advance spec for 1995 Evinrude Vindicator 200 hp Model E200CXEOC

    All, I am experiencing a bog at take off and have tried a lot of things to get rid of it. I have replaced the power pack, the ignition coils, the spark plugs, rebuilt the carburetors and cleaned them twice. The bog still haunts me. I just recent ran across the Joe timing method and would like...
  6. D

    1995 Evinrude Vindicator 200 hp E200CXEOC acceleration problem

    I have a 1995 Evinrude 200 Vindicator (Model: E200CXE0C) that has problems with acceleration. It seems to bog down when taking off. In neutral, I can get full rpms without hesitation. It only bogs under load, Forward and Reverse. If i put in neutral and rev engine a few times then place back...
  7. D

    1995 Evinrude Vindicator 200 hp Model E200CXEOC Heavy white smoke.

    All, I'm not sure if I am having VRO issue of over filling with oil or what but it is smoking like crazy! Opened the bowls and look like there is more oil in them then gas. I've never had issues with heavy smoke before but all of a sudden. Should I just bypass the VRO and pre-mix? I did just...
  8. D

    1995 Evinrude Vindicator Stator Failure

    Ok somebody, anybody! HELP!! I recently had a no fire condition. After inspection I saw the black gunk coming from the stator. I checked the ohms of the stator and they were below spec on each side. i figured this was the issues since the stator is old and shows all the signs of being No Good...
  9. D

    1995 Evinrude Vindicator sometimes stall when throttling up

    Hi guys, I have a 1995 Evinrude Vindicator 200 hp on a 201 stratos pro xl. I've had this boat for all of 2 years and since I've had it, during take off the engine stalls sometimes and cut off. I found that if i give it two to three revs and throw it in gear it will go ahead on and take off. I do...
  10. D

    Installing Oil Sending unit to NMEA Network

    All, As as a winter project, I would like to digitize the oil level readings and intergrate it to the NMEA network. I currently have a 1995 Stratos 201 pro xl with 1995 Evinrude 200hp (E200cxeoc). Has anyone ever done this. Future goals is to have all fluid levels digitized to show on Lowrance...
  11. D

    Trim down button not working on throttle handle but works at bow and motor

    Hi all, trim down button has stopped working on the throttle lever. Relays seem to work due to trim up and down working on the bow switch and motor switch. Does anyone know how to disassemble the throttle handle? Am I overlooking a common loose connection of some sort? Boat is 1995 Stratos 201...
  12. D

    No Fire Evinrude Vindicator 200 hp Serial # E200CXEOC

    All, I've recently purchased a boat with an Evinrude Vindicator 200hp outboard SR# E200CXEC. The engine was firing and running really well at the time of purchase. I've set the Boat up for the winter and decided to give it a start this past weekend. However, when starting the engine I got...
  13. D

    1977 70hp Evinrude (70773S)

    All, I am new to the Forum so thanks in advance too all who help me figure out what’s going on with my outboard. Background: I’ve recently replaced all coil packs and the power pack trying to get rid of a misfire. Misfire seems as if the engine is running on two cylinders. I also replaced the...
See more
Back
Top