Logo

Recent content by Cshaw

  1. C

    1999, 175 hp Evinrude

    Fuel pump is bottom left one above is stop & ign
  2. C

    1999 115hp evinrude ficht

    Problem solved new it was something easy im an idiot dident connect the neutral switch wires to the key switch …
  3. C

    1999 115hp evinrude ficht

    We’ll I figured it might be something easy so I replaced the starter solenoid and still no crank at the key switch
  4. C

    1999 115hp evinrude ficht

    Do I need to hook anything else to to the motor all I’ve hooked up is the ev diag tool and the key switch nothing else just need it to turn over before I hook up oil and fuel I’ve checked all fuses and relays that pertain to the ignition
  5. C

    1999, 175 hp Evinrude

    I have the photos of the diagrams won’t let me post on here shoot me your email and I can send them
  6. C

    1999 115hp evinrude ficht

    Hey guys I recently bought an outboard motor a 115hp evinrude year 1999 E115fpleen Having an issue with no crank at the key switch when I bought the motor it supposedly had a bad number 4 injector well the fuse was blown for 2&4 injectors I bought the correct key switch to the motor have it...
  7. C

    1999 115hp evinrude oil injection delete

    Hey guys I recently bought an outboard motor a 115hp evinrude year 1999 E115fpleen I’m wondering what are the correct steps to delete the oil injection on this type of motor I’ve done it on the 80s models before but never on something this new any help is appreciated thanks
  8. C

    1978 402 mercury outboard help water in carb

    Been working on this motor for awhile 2 weeks ago i changed the impeller gave new oil and a new starter solenoid new thermostat and got the motor fired up and it sounded great and idled really good now this week i go to fire it up and it idles good for about 3 minutes then shuts off i took of...
  9. C

    1979 402 mercury help

    I have bought a new boat in a previous thread i inquired about an ignition i got a new one and wired it up got good fuel running to my 402 mercury fired the motor up and it runs full boar immediately im guessing its something with the carb seeing as the throttle cable is not doing it any...
  10. C

    1979 402 Mercury Outboard Control box problems

    i think my motor is a 1979 Serial #- 5041721 im having trouble finding anything for this motor i bought the boat and the control box was in shambles so i bought a parts motor that came with a control box but i have no key so i need help finding and ignition for it or if there are ways i...
  11. C

    1975 or 1978 50 hp merc

    Having troubles keeping my outboard running ive been working on it the past few days im used to working on OMC my motor has good compression has spark the motor runs for about 20 seconds then cuts out it loses its prime immediately ive put new lines connecters and prime bulb and has done nothing...
  12. C

    1991 70hp Johnson outboard

    Looking for a little bit of help I’ve been trying to trouble shoot my new boat motor new to me I guess the problems it’s having is I will take it out to the lake it will start up fine runs idles good runs full speed just fine the. After I idle it down a bit and cruise the motor dies out and...
  13. C

    1990 bass tracker tournament tx

    Hey I'm restoring a bass tracker I'm wondering is there any lumber out there that they make wide enough for the boat or do you just cut couple pieces and glue them together then carpet I can find any plywood or anything so I can do the whole deck in one solid peice
  14. C

    1974 mercury outboard

    Working on this mercury trying to get it to start it has good compression good spark it turns over very well first thing I found the gas was coming out milky from the fuel pump cleaned it out and still can't get the motor to fire any help is appreciated
  15. C

    1991 70 go Johnson

    I was look for some help at the best way to drop the lower unit to change the impeller specifically detaching the shifting linkage from the lower unit thank you any help is appreciated
Back
Top