420488-1 - Kill Switch, Universal
Seadog Universal Kill Switch
Stamped brass/injection molded nylon & delrin kill switch. Replace lanyard if worn, cut or frayed. Dual circuitry allows kill switch to be wired for either ignition kill or magneto kill depending on the application. WARNING: Test switch for proper function before each use.
420488-1 Universal Kill Switch
A- 7/16, B- 5/8 Inch
The universal marine emergency cut-off, safety switch attaches to your life vest while operating a boat or personal watercraft and is designed to instantly cut battery power when detached.
Dual circuitry allows kill switch to be wired for either ignition kill or magneto kill depending on the application.
The housing is constructed of weatherproof injection molded nylon and Delrin with .250" brass terminals.
The switch includes a lanyard approximately 15" when coiled and 48" when stretched which should be replaced if worn, cut or frayed.
Mounting hole is 5/8" in diameter and can be mounted in a panel up to 3/8" thickness.
Maximum 5-amp draw. WARNING: For your safety, switch should be tested for proper function before each use.
|420489-1 - Replacement Lanyard Only, F/420488|