Parts for MerCruiser 60 Renault 68 I / L4 1965-1968 Gimbal / Bell Housing Assembly
Reference numbers in this diagram can be found in a light blue row below — scroll down to order.
| #1 | -38160A 4 | GIMBAL HOUSING ASSEMBLY (1 required per assembly) |
 |
38160A 4 - Housing [ More info ] Unavailable |
|
|
38160A 8 - Housing [ More info ] Unavailable |
|
|
|
49201A 4 - Housing Assembly, NLA [ More info ]
|
| #2 | 22-31345 | GREASE FITTING (1 required per assembly) |
|
22-31345 - Fitting - Priced Individually [ More info ] Unavailable |
|
  |
|
22-74036 - Fitting - Priced Individually [ More info ]
|
  |
|
228M0169589 - FITTING Note: Priced Individually [ More info ]
|
| #3 | -29359 | LUBRICAP (1 required per assembly) |
|
|
29359 - Lubricap - Priced Individually [ More info ]
|
  |
|
19-77633 - Cap - Priced Individually [ More info ]
|
  |
|
19-77633Q - Cap - Pack of 5 as shown [ More info ]
|
| #4 | 19-38860 | WELCH PLUG-Top (1 required per assembly) |
|
|
19-38860 - WELCH PLUG,NLA [ More info ] Unavailable |
| #5 | 23-38634 | BUSHING-Upper (1 required per assembly) |
  |
|
23-38634 - Bushing, NLA [ More info ]
|
| #6 | 26-32540 | OIL SEAL-Upper Gimbal Housing Bushing (1 required per assembly) |
  |
|
26-32540 - Seal, NLA [ More info ]
|
| #7 | 23-38196 | BUSHING-Lower (1 required per assembly) |
|
|
23-38196 - BUSHING,NLA [ More info ] Unavailable |
| #8 | 26-32911 | OIL SEAL-Lower Gimbal Housing Bushing (2 required per assembly) |
  |
|
|
  |
|
18-0517 - Seal, 26-32911 [ More info ]
|
| #9 | 30-31561 | BALL BEARING (1 required per assembly) |
  |
|
30-31561 - Ball Bearing, NLA [ More info ]
|
| #10 | -38188 | MOUNUT-Rubber-Gimbal Housing Ball Bearing (1 required per assembly) |
|
|
38188 - Gimbal Housing Ball Bearing Mount, Rubber, NLA [ More info ] Unavailable |
| #11 | 10-35046 | DRIVE SCREW-Exhaust Flange (8 required per assembly) |
|
|
10-35046 - SCREW,NLA [ More info ] Unavailable |
| #12 | 27-38168 | GASKET-Gimbal Housing to Transom (1 required per assembly) |
|
27-38168 - Gimbal Housing To Transom Gasket [ More info ] Unavailable |
|
  |
|
27-70975 - Gasket [ More info ] Unavailable |
| #13 | -38413 | PILOT RING (1 required per assembly) |
|
|
38413 - Pilot Ring, NLA [ More info ]
|
| #14 | 26-38294 | SEAL-Water (1 required per assembly) |
  |
|
26-38294 - Seal, NLA [ More info ]
|
| #15 | -34762A 1 | PLATE ASSEMBLY-Inhibitor (1 required per assembly) |
  |
|
34762A 1 - Plate Kit [ More info ]
|
  |
|
18-6013 - Anode, Zinc, 34762A 1 [ More info ]
|
| #16 | 10-34763 | SCREW-Inhibitor Plate to Gimbal Housing (3/4 IN.) (2 required per assembly) |
|
|
10-34763 - Screw - Priced Individually [ More info ]
|
| #17 | 10-34290 | SCREW-Water Tube Cover to Gimbal Housing (5/8 IN.) (2 required per assembly) |
  |
|
10-34290 - Screw [ More info ]
|
| #18 | 23-38265 | BUSHING-Seal-Water Tube (1 required per assembly) |
|
|
23-38265 - Bushing, NLA [ More info ]
|
| #19 | 54-38840 | CLAMP-Water Tube to Gimbal Housing (1 required per assembly) (S/N-1830978 & Up) |
|
|
54-38840 - CLAMP,NLA [ More info ] Unavailable |
| #20 | 10-38862 | SCREW-Water Tube Clamp to Gimbal Housing (5/8 IN.) (1 required per assembly) (S/N-1830978 & Up) |
|
10-38862 - Screw - Priced Individually [ More info ] Unavailable |
|
  |
|
10-38601 - Screw - Priced Individually [ More info ]
|
| #21 | 13-26992 | LOCKWASHER-Water Tube Clamp Screw (1 required per assembly) (S/N-1830978 & Up) |
  |
|
13-26992 - LockWasher - Priced Individually [ More info ]
|
| #22 | 32-38841 | WATER TUBE (1 required per assembly) (S/N-1830978 & Up) |
|
|
32-38841 - Tube, NLA [ More info ] Unavailable |
| #22 | 32-38264 | WATER TUBE (1 required per assembly) (S/N-1830977 & Below) |
|
|
32-38264 - Tube, NLA [ More info ] Unavailable |
| #23 | -38209 | COVER-Water Tube (1 required per assembly) (S/N-1830978 & Up) |
|
|
38209 - Water Tube Cover [ More info ]
|
| #23 | -38904 | COVER-Water Tube (1 required per assembly) (S/N-1830977 & Below) |
|
|
38904 - Cover, NLA [ More info ] Unavailable |
| #24 | 32-38303 | WATER HOSE-Gimbal Housing to Bell Housing (10-1/4 IN.) (1 required per assembly) (S/N-1830978 & Up) |
|
32-38303 - Hose-Water-Gimbal Housing To Bell Housing - 10.25 Inch [ More info ] Unavailable |
|
|
|
32-46716A 1 - Hose [ More info ]
|
| #24 | 32-38905 | WATER HOSE-Gimbal Housing to Bell Housing (13 IN.) (1 required per assembly) (S/N-1830977 & Below) |
|
32-38905 - Hose - Water - 13 Inch [ More info ] Unavailable |
|
| #25 | 23-34103 | BUSHING-Nylon-Water Tube Seal (1 required per assembly) (S/N-1830977 & Below) |
|
|
23-34103 - Bushing [ More info ]
|
| #26 | 54-35830 | CLAMP-Water Tube to Gimbal Housing and Bell Housing (2 required per assembly) |
|
54-35830 - Hose Clamp [ More info ] Unavailable |
|
|
|
54-815504206 - Clamp [ More info ] Unavailable |
| #27 | -38584 | PLATE-Supporting-Transom Plate (Top) (1 required per assembly) |
|
|
38584 - PLATE,NLA [ More info ] Unavailable |
| #28 | 12-38585 | WASHER-Square-Transom Screw (2 required per assembly) |
|
|
12-38585 - Washer, Square,Transom Screw, NLA [ More info ]
|
| #29 | 10-38197 | SCREW-Transom to Gimbal Housing (3-1/2 IN.) (4 required per assembly) |
|
|
10-38197 - BOLT,NLA [ More info ] Unavailable |
| #30 | 13-30381 | LOCKWASHER-Transom Screw (4 required per assembly) |
|
|
13-30381 - LockWasher, NLA [ More info ]
|
| #31 | 10-38233 | BOLT-Gimbal Housing to transom Plate (4-1/4 IN.) (4 required per assembly) |
|
10-38233 - BOLT [ More info ] Unavailable |
|
|
|
10-48565A 1 - Screw Assembly, NLA [ More info ]
|
| #32 | 12-38403 | WASHER-Rubber-Gimbal Housing Bolt (4 required per assembly) |
|
|
12-38403 - Washer-Rubber-Gimbal Housing Bolt, NLA [ More info ]
|
| #33 | 12-21900 | WASHER-Gimbal Housing Bolt (4 required per assembly) |
|
|
12-21900 - Washer [ More info ]
|
| #34 | 11-34087 | NUT-Gimbal Housing Bolt (4 required per assembly) |
  |
|
11-34087 - Nut - Priced Individually [ More info ]
|
| #35 | -38176A 1 | BELLOWS ASSEMBLY-Universal Joint (1 required per assembly) |
  |
|
38176A 1 - Bellows Assembly [ More info ]
|
| #36 | 54-32739 | CLAMP-Universal Joint Bellows to Gimbal Housing (1 required per assembly) |
  |
|
54-32739 - Exhaust Hose Clamp [ More info ]
|
  |
|
54-815504352 - Clamp [ More info ]
|
| #37 | 54-38889 | CLAMP-Universal Joint to Bell Housing (1 required per assembly) |
|
54-38889 - CLAMP [ More info ] Unavailable |
|
|
|
54-815504360 - Clamp, NLA [ More info ]
|
| #38 | -38177 | EXHAUST BELLOWS (1 required per assembly) |
  |
|
38177 - Bellows, NLA [ More info ] Unavailable |
| #39 | 54-38888 | CLAMP-Exhaust Bellows to Gimbal Housing (1 required per assembly) |
|
|
54-38888 - Clamp [ More info ]
|
|
|
54-815504336 - Clamp [ More info ]
|
| #41 | -38162A 1 | BELL HOUSING ASSEMBLY (1 required per assembly) |
|
38162A 1 - Housing [ More info ] Unavailable |
|
|
|
38162A 3 - Bell Housing, NLA [ More info ] Unavailable |
| #42 | 22-38939 | COUPLING-Water Hose to Bell Housing (1 required per assembly) |
|
22-38939 - COUPLING [ More info ] Unavailable |
|
|
|
22-30570 - Fitting, NLA [ More info ] Unavailable |
| #44 | 23-35088 | BUSHING-Upper Shift Shaft-Bell Housing (1 required per assembly) |
|
23-35088 - Bushing [ More info ] Unavailable |
|
  |
|
23-79372 - Bushing - Bell Housing - 5/8 Inch [ More info ]
|
  |
|
23-814308 - Bushing [ More info ]
|
| #45 | 25-31305 | O RING (1 required per assembly) (LARGE) |
  |
|
25-31305 - O Ring (3.234 Id X .139) [ More info ]
|
  |
|
18-7172-9 - O-Ring (PK5) 553126, 25-31305 [ More info ]
|
| #46 | 25-22762 | O RING (1 required per assembly) (SMALL) |
  |
|
25-22762 - O Ring, Gear Housing Seal [ More info ]
|
| #47 | 16-35937 | STUD-Bell Housing to Drive Shaft Housing (2-7/8 IN.) (4 required per assembly) |
|
16-35937 - Stud [ More info ] Unavailable |
|
  |
|
|
| #48 | 12-35935 | WASHER-Bell Housing Stud (4 required per assembly) |
|
12-35935 - Washer, (.435 X .875 X .105) Stainless Steel [ More info ] Unavailable |
|
  |
|
12-8M0204655 - WASHER Note: Priced Individually C/U W/BELHSG&T PINZZ [ More info ]
|
| #49 | 11-34933 | NUT-Bell Housing Stud (4 required per assembly) |
  |
11-34933 - Nut (7/16-20) [ More info ] Unavailable |
|
  |
|
11-8M0204653 - Prop Lock Nut 7/16-20 , Priced Individually [ More info ]
|
  |
|
18-3721-9 - Lock Nut, 11-34933, 5PK [ More info ]
|
| #50 | 27-38178 | GASKET-Bell Housing to Drive Shaft Housing (1 required per assembly) |
|
27-38178 - Bell Housing To Drive Shaft Housing Gasket [ More info ] Unavailable |
|
  |
|
27-45749A 1 - Bell Housing To Drive Shaft Housing Gasket [ More info ]
|
| #51 | -38190A 1 | UPPER SHIFT SHAFT ASSEMBLY (1 required per assembly) |
|
|
38190A 1 - Upper Shift Shaft Assembly, NLA [ More info ]
|
| #52 | -38189A 1 | UPPER SHIFT SHAFT LEVER ASSEMBLY (1 required per assembly) |
|
|
38189A 1 - LEVER ASSY,NLA [ More info ] Unavailable |
| #53 | 12-32510 | WASHER-Plastic (1 required per assembly) |
|
|
12-32510 - Washer, Upper Shift Shaft Lever (Plastic) NLA [ More info ]
|
| #54 | 12-38358 | WASHER-Rubber (1 required per assembly) |
|
|
12-38358 - Washer, Upper Shift Shaft Lever Sealing, NLA [ More info ]
|
| #55 | 18-32857 | COTTER PIN (1 required per assembly) |
|
18-32857 - Cotter Pin , Priced Individually [ More info ] Unavailable |
|
|
|
18-32857 1 - Cotter Pin [ More info ]
|
|
|
18-8M0214922 - PIN-COTTER [ More info ] Unavailable |
| #56 | 19-32525 | WELCH PLUG (1 required per assembly) |
|
|
19-32525 - Plug, NLA [ More info ]
|
| #57 | -38262A 1 | LINK ROD ASSEMBLY (1 required per assembly) |
|
|
38262A 1 - ROD ASSY,NLA [ More info ] Unavailable |
| #58 | 12-38255 | WASHER-Link Rod (1/2 IN. O.D.) (1 required per assembly) |
|
|
12-38255 - Washer, NLA [ More info ]
|
| #59 | 18-21071 | COTTER PIN-Link Rod to Upper Shift Shaft Lever (1 required per assembly) |
  |
|
18-21071 - Cotter Pin - Priced Individually [ More info ]
|
  |
|
18-21071 1 - Cotter Pin - Priced Individually [ More info ]
|
| #60 | 12-30164 | WASHER -Link Rod(3/8 IN. O.D.) (1 required per assembly) |
  |
|
12-30164 - Washer, (.192 X .375 X .0312) [ More info ]
|
