Cylinder/crankcase Fittings & Oil Recirculation Hoses Parts for 2008 Evinrude 75 hp E75DPLSCB Outboard Motor
Reference numbers in this diagram can be found in a light blue row below — scroll down to order.
| #1 — 778708 — HOSE, OIL (.093IN. - BULK ROLL 25 FT.). (QTY 2) UPPER - LENGTH 10.5IN. (266MM) (1 required per assembly) | ||
  |
|
0778708 - Oil Supply Hose, priced per foot. [ More info ]
|
| #2 — 772571 — HOSE, OIL (5/32IN. - BULK ROLL 25 FT.). (QTY 2) LOWER - LENGTH 4.2IN.(106MM), (QTY 1) VENT - LENGTH 3.75IN. (95.2MM) (1 required per assembly) | ||
  |
|
0772571 - Braided Hose 5/32 inch, sold by the foot [ More info ]
|
  |
|
|
| #3 — 317893 — TIE STRAP (8 required per assembly) | ||
  |
|
0317893 - Tie Strap [ More info ]
|
| #4 — 348471 — FITTING, OIL RECIRCULATION-VENT (1 required per assembly) | ||
  |
|
|
| #5 — 346137 — FITTING, OIL RECIRCULATION UPPER ELBOW (2 required per assembly) | ||
  |
|
0346137- Nipple - Elbow [ More info ] Unavailable |
| #6 — 348471 — CHECK VALVE, OIL RECIRCULATION LOWER (2 required per assembly) | ||
|
|
|
| #7 — 348478 — CHECK VALVE, IN LINE OIL RECIRCULATION (3 required per assembly) | ||
  |
0348478 - Check Valve [ More info ] Unavailable |
|
 |
|
5009201 - Check Valve [ More info ]
|
| #8 — 332135 — PLUG, WATER PRESSURE (1 required per assembly) | ||
  |
|
|
| #9 — 343929 — SCREW, EMISSION PROBE PLUG (1 required per assembly) | ||
  |
|
0343929 - Screw, Emission Probe Plug [ More info ]
|
| #10 — 343928 — *WASHER, EMISSION PLUG SCREW (1 required per assembly) | ||
|
0343928 - WASHER [ More info ] Unavailable |
|
|
|
0343929 - Screw, Emission Probe Plug [ More info ]
|
| #11 — 345854 — FITTING, FUEL PUMP PULSE (1 required per assembly) | ||
  |
|
0345854 - Fitting [ More info ]
|
| #12 — 344821 — FITTING, OIL INLET (3 required per assembly) | ||
  |
|
|
| #13 — 328932 — FITTING, OIL RECIRCULATION-UPPER (1 required per assembly) |
| #14 — 346137 — FITTING, OIL INLET, SLEEVE (3 required per assembly) | ||
|
|
0346137- Nipple - Elbow [ More info ] Unavailable |