Click Part Number for Price and Availability
  < Previous Page   Next Page >
TEST EQUIPMENT
TOOLS
Johnson/Evinrude Remote Starter
Spark Gap Tester
511-6996
511-9764 (Neon Indicator)
Remote Starter
Sealed 1 Cyl. In-Line Neon
Controls most OMC engines from
Spark Gap Tester
1975 thru 2000. Unit replaces boat
Ideal for personal watercraft.
controls at the engine so you can
Sealed design is an added safety
quickly determine if the boat harness
factor that further reduces the
is a source of trouble.
possibility of igniting gas fumes,
especially inside the hull of a
Mercury Outboard Remote Starter
PWC, I/O or Inboard boat. Use the
ground clip to check spark at
511-7800
cranking speed. If checking for a
Remote Starter
running problem on an engine,
Controls most Mercury engines with
remove the ground clip and
through the splash-pan boat harness
connect the tester inline between
connection. Unit replaces boat
the spark plug wire and the spark
controls at the engine so you can
plug.
quickly determine if the boat
harness is a source of trouble. Has 6
511-9766
foot long battery cables.
Enclosed 8 Cyl. Adjustable
Spark Gap Tester
Has heavy duty wire for
511-7900
mounting in any position. Helps
Remote Starter
reduce possibility of igniting
Controls most Mercury engines from
gas fumes.
1979 thru 2000. Unit replaces boat
controls at the engine so you can
511-9902
quickly determine if the boat
7" Extension Wires for use with
harness is a source of trouble.
511-9766
511-9903
24" Extension Wires for use with
Mercury Mercruiser Remote Starter
511-9766
511-7950
Remote Starter
Ampmeter Adapter
Controls most Mercury I/O engines.
Unit replaces boat controls at the
511-9772 DC Ampmeter
engine so you can quickly
Adapter
determine if the boat harness is a
Recommended for use with digital
source of trouble.
multimeters. Range 1 to 400 amps
as 1 millivolt to 4 volts. Extension
harness is available (511-9788E).
Battery CD Tester
511-9701
Battery CD Tester
Breakout Box
Tests all battery CD units on
the engine or on the bench by
simulating trigger and points.
511-9756
Can also be used to pulse EFI
Breakout Box
injectors.
For testing OMC systems. This box
will replace the Stevens SA5 and
SA6 OMC type test boxes.
Trigger Tester
511-9710
Trigger Tester
Ideal for testing Mercury/Mariner
triggers, Chrysler/Force triggers and
Chrysler pre-amp and hall effect
Be sure to check on our web site for the latest
sensors, OMC 1988 and up V6 Quick
Troubleshooting Guide and Catalog in PDF format.
Start timer bases. Also used on OMC
New test equipment and Tech Tips will be posted
OIS ignition, EFI. Great for
periodically.
comparing coils on an engine to
determine possible coil failure.
www.cdielectronics.com
57