Logo

Tools & Rudder Torque Data Sheets

9-20
Selection Guide
SeaStar
®
/BayStar
Power Purge Jr. is the quickest way to bleed a
SeaStar
®
/BayStar
system in the field and assure a rock-solid steering
feel every time!
The Power Purge Jr. reduces installation and warranty costs while
enhancing the quality of the boat to the end user. A typical manual fill
and purge takes the average experienced installer or service
technician about 30 minutes per boat by using the Power Purge Jr.
this can be reduced to 10 minutes or less.
Advantages:
SeaStar Power Purge JR.
Part# HA5445-2
SeaStar Bleed Hose
Part# HA5438
INCLUDED IN HA5438
INCLUDED IN HA5438
This kit is needed to properly
bleed the SeaStar Outboard
steering kit
Screws onto the SeaStar
and equivalent fluid to bleed
the SeaStar system
Makes for a clean bleed
when used properly
SeaStar Remote Fill
Part# HA6450
Can be used with ALL SeaStar
Helm pumps
Relocate your fill plug to a
more convenient or hidden
place
Steering feel is solid every time
Complete Fill & Purge in 10
minutes or less
Fast and efficient
Easy to operate
Screens contaminants from oil
Quick connect fittings
Convenient portable size
Convenient electrical hook-up
utilizing 12 volt boat battery
Optional Dual Cylinder Purging Kit
HA5461 available
Optional 50’ Hose Extension Kit
HA5462, for those longer runs
TOOLS AND RUDDER TORQUE
DATA SHEETS
requires 3/4" hole to be drilled
onto dash above helm pump.
NOTICE
Replacement Parts List
Helm adapter, Kit # HP6148
(one per kit)
Quick connect fitting
replacement, Kit # HP6170
(includes all quick connect
fittings, NO hose)
Hose/Quick connect
replacement, Kit # HP6171
Power Purge Motor
replacement, Kit # HP6116