Logo

SeaStar Outboard Hose

9-2
Selection Guide
PART NO. KIT DESCRIPTION
* HO51xx SeaStar Standard Outboard Hose Kit (2 hoses)
* HO57xx SeaStar Pro Hose Kit (2 hoses)
** HO81xx SeaStar Bulkhead Hose Kit, Standard (2 hoses)
** HO82xx SeaStar Bulkhead Hose Kit, Pro (2 hoses)
** HO86xx SeaStar Bulkhead Hose Kit, Polished Plate (2 hoses)
** HO87xx SeaStar PRO Bulkhead Hose Kit, Polished Plate (2 hoses)
** HO88xx SeaStar Bulkhead Hose Kit, Polished Plate double (2 hoses)
** HO89xx
SeaStar PRO Bulkhead Hose Kit, Polished Plate double (2 hoses)
SeaStar and SeaStar PRO steering hoses are available in kits (two,
equal lengths of hose per kit). Before ordering you must consider the
following areas to ensure that you order the correct length for the
cleanest installation. In ALL applications, hydraulic hose/tubing
should
be secured along the routing path where possible and should not be
allowed to hang free in any area where they may become a safety
hazard. SeaStar Solutions recommends the use of a rigging tube,
PVC
piping or conduit for the safe installation and protection of the
steering
hose/tube. DO NOT install hoses in such a way that they
become
exposed to high heat areas such as engine components (i.e.
manifolds
or exhaust components), or in highly corrosive areas such
as battery
fumes or electrical connections. Each part number contains
two hoses
of equal length.
SeaStar Solutions offers two different types of steering hoses;
Standard (straight line hoses, not passing through bulkheads)
from
1' to 5' (1' increments ), 6' to 30' (2' increments), both SeaStar
standard and SeaStar PRO available.
Bulkhead hoses (for use where the hose is required to pass through
a bulkhead). Available from 2' to 5' (1' increments) 6' to 30' (2'
increments), both SeaStar standard and SeaStar PRO available.
SeaStar Hose Kits:
How to Order
SEASTAR OUTBOARD HOSE
Each part number contains two hoses of equal length.
DUST CAP
TO HELM
PUMP
TO CYLINDER
HOSE FITTING
BULKHEAD MOUNTING PLATE
#10 SCREWS
CUSTOMER SUPPLIED
BULKHEAD
PIGTAIL FITTING
BEND RESTRICTOR
DUST CAP
HOSE FITTING
Bulkhead Hose Kits
For the cleanest Installation.
SeaStar PRO Helm systems
require the use of SeaStar PRO
(1500 psi) reinforced Kevlar
Hoses ONLY.
WARNING
NOTICE
SeaStar Bulkhead hoses provide
the cleanest hose routine.
* SeaStar Standard and Pro Hose Kits
are available in lengths from 2' 30'.
** SeaStar Standard and Pro Bulkhead
Hose Kits are available in lengths from
12' 30'.
HO86xx Dual Polished Plate shown.