Logo

Hynautic Inboard Steering: General Dimensions

4-4
Selection Guide
A (COLLAPSED LENGTH)
FIXED MOUNT SIDE
D
C
B
2"
(51mm)
0.85"
(22mm)
3.5"
(89mm)
2" (51mm)
0.5"
(13mm)
DIA.
15° MAX.
MISALIGNMENT
HC5322-3 (K-18 cylinder replacement) HC5323-3 (K-19 cylinder replacement)
These balanced cylinders are double rod ended, each end
held in place
with internal wire ties. Every cylinder is equipped with a swivel joint
at each end. One provides for a fixed mount attachment point at the
end of the housing to protect the moving rod. The other swivel joint,
located at the rod end, allows for free movement of the cylinder
without binding when attached to the rudder arm.
Above cylinders can be used on the following boats:
HC5322-3 = ALL System #1 as noted on page 4-2.
HC5323-3 = ALL Systems #1 through #3 as noted on page 4-2.
CYL DIMENSIONS
MODEL AB C D BORE STROKE DISP
HC5322-3 24.5" (662mm) 9.31" (237mm) 11.75" (299mm) 9.875" (251mm) 1.25" (32mm) 7" (178mm) 7cu in
HC5323-3 28.5" (724mm) 11.31" (287mm) 13.75" (350mm) 11.875" (302mm) 1.25" (32mm) 9" (229mm) 9cu in
Universal Mount Cylinders
HC5322-3 (K-18 cylinder
replacement)
HC5323-3 (K-19 cylinder
replacement)
General Dimensions–Hynautic
DO NOT attempt to install NPT pipe fittings into the cylinder hose
fitting ports on any -3 model cylinder. Doing so will lead to irreparable
damage to the cylinder. ONLY use ORB hose fittings provided by
SeaStar Solutions.
CAUTION
INBOARD STEERING