Logo

SeaStar Outboard Tournament: Application Guide & Engine Configurations

SEASTAR and BAYSTAR Hydraulic Steering Systems
3-11
OUTBOARD–TOURNAMENT
It is important to note that each engine configuration requires a
hardware kit and tie bar kit(s), with the exception of the single
engine configuration.
TOURNAMENT CYLINDER HARDWARE KIT TIEBAR NOTES
CYLINDER
PART# QTY PART# QTY ENGINE CENTER ENGINE CENTER PART# QTY
CONFIGURATION
DISTANCE (IN) DISTANCE (mm)
SINGLE ENGINE HC6845S 1 N/A N/A N/A N/A N/A N/A N/A
SINGLE CYLINDER
TWIN ENGINE HC6845 1 HA6802 1 25.0" – 25.6" 635 mm – 650 mm HO6821 1 1, 3, 4, 5, 7
SINGLE CYLINDER 25.7" – 30.6" 653 mm – 777 mm HO6822 1 1, 3, 4, 5, 7
(Starboard) 30.7" – 39.0" 780 mm – 991 mm HO6823 1 1, 3, 4, 5, 7
TWIN ENGINE HC6845 2 HA6804 1 25.0" – 26.5" 635 mm – 673 mm HO6820 1 1, 3, 4, 5
DUAL CYLINDER 26.6" – 29.3" 676 mm – 744 mm HO6821 1 1, 3, 4, 5
29.4" – 34.2" 747 mm – 869 mm HO6822 1 1, 3, 4, 5
34.3" – 43.0" 871 mm – 1092 mm HO6823 1 1, 3, 4, 5
TRIPLE ENGINE HC6845 2 HA6806 1 25.0" – 27.9" 635 mm – 709 mm HO6822 2 1, 2, 3, 4, 5, 6
DUAL CYLINDER 28.0" – 36.0" 711 mm – 914 mm HO6823 2 1, 2, 3, 4, 5, 6
QUAD ENGINE HC6845 2 HA6811 1 Consult SeaStar Solutions Technical Service 1, 2, 3, 4, 5
DUAL CYLINDER
QUINTUPLET Consult SeaStar Solutions Technical Service 1, 2, 3, 4, 5
Engine (Plus)
NOTES
1. Installation may vary according to the following factors: engine mounting height,
transom thickness, use of transom savers, tiller bolt location, engine tilt range,
and engine size.
2. For center engine drops greater than 3 inches (76mm), please consult SeaStar
Solutions Technical Service.
3. Tiebar length may vary depending on toe in/toe out setup. To allow for toe, add
or subtract from your nominal engine center to center distance.
4. Based on recommended engine manufacturer minimum center to center
distances.
Deviating from these recommendations may require stroke limiting cylinders
and/or engine tilt limiting, please consult SeaStar Solutions Technical Service.
5. Cylinder's must be plumbed in parallel only, no series connections.
Only exception is if cylinders are utilizing a liquid tie bar.
6. Maximum drop: <3 inches (76mm). Contact SeaStar Solutions Technical
Support for center engine drops greater than 3 inches.
7.
Extra long tiebar kits available, contact SeaStar Solutions Technical Support for details.
Engine Configurations
Single Engine Single Cylinder Configuration.
Tournament Series Application Guide
All Engine Makes 200 HP+