33-14103568 - NGK BUZ8H - Priced Individually

33-14103568  NGK BUZ8H Surface Gap Spark Plug.

NGK BUZ8H surface gap plugs feature an inductive resistor, tungsten center electrode and a solid terminal.

Check your engine owner’s manual for the correct spark plug and use only the plug as recommended by your engine’s original equipment manufacturer.

NGK Trivalent metal plating also provides superior anti-corrosion in the marine environment and anti-seizing for easier removal.

Don’t just clean used spark plugs, replace them with new plugs for better performance.

Resistor style spark plugs help reduce radio frequency interference in onboard electronics.

The NGK BUZ8H surface gap plugs have no side electrode to pre-gap and are nearly immune to pre-ignition (knocking). Surface gap plugs have no heat range listing as the electrode design prevents the firing tip from overheating causing pre-ignition. The NGK inductive resistor uses a coiled nickel wire which is inserted in the stem of the plug and held in place by a spring to create a natural “field” resistor reducing radio frequency interference (RFI) in onboard electronics. Use only the spark plug listed in your engine owner’s manual. Using the wrong plug can reducing optimum performance, reduce fuel economy or cause damage to your engine. Spark plugs are easy to change with common spark plug sockets. The NGK pure alumina silicate ceramic insulator provides superior strength, reduces breakage and better heat transfer. The Ribbed Suppressor Seal extends resistance and prevents spark “flash over” and misfire plus the triple seal helps prevent leakage.