Logo
FULL SITE MENU

Search results

  1. B

    Run with water hose only

    Must be easy to answer but for some reason I can't find it on the net... Can I run my outboard (1987 Evinrude 50HP) cooled with muffin/water hose outside the water on full throttle for 5-10 minutes or so? Or will this cool just enough to run on idle? Need to do some test runs on full throttle...
  2. B

    50 HP '87 Evinrude fuel problem

    The tank and primer bulb are new and tried a different one as well with the same result. The new chambers came with jets already installed. I have not adjusted them. One is fully in. One is just a mm out like the image (blue marking reflects how far the nozzle is out.) Not sure is they are...
  3. B

    50 HP '87 Evinrude fuel problem

    Guys, To start with my problem (from 6 seconds onwards): https://youtu.be/YbdG-p2ooUw Background... I've been working on my 2nd hand bought 1987 Evinrude 50HP (E50BELCUD). On the first test run idle was fine but the engine died immediatly on throttle. I replaced the VRO pump with a generic...
  4. B

    Dell Quay Dory 13 hull and foam restoration

    Guys, I've bought myself a second-hand Dell Quay Dory 13 ft. It appears there are some small leaks in the hull, probably for quite a while, that have caused water to come in. The boat weights a ton so I expect most foam below the water line has filled with water. The overall hull seems rather...
  5. B

    Dell Quay Dory 13 hull and foam restoration.

    Guys, I've bought myself a second-hand Dell Quay Dory 13 ft. It appears there are some small leaks in the hull, probably for quite a while, that have caused water to come in. The boat weights a ton so I expect most foam below the water line has filled with water. The overall hull seems rather...
  6. B

    Carb high speed jet broken and blocked

    Guys, I've been working on my 50 HP '87 Evinrude for the last couple of days. I've replaced the VRO for a normal fuel pump. Engine (still) bogs and dies on throttle so disassembled the carb and found the problem to be in the high speed jet being broken and closed; no fuel running through...
  7. B

    Can I replace VRO with VRO2 pump?

    Hi, My 1987 Evinrude 50HP (E50BELCUD) VRO pump has a crack and is leaking fuel. (VRO Pump part# 174570) I can buy a used VRO pomp from an early 90's Johnson 40HP. I believe this is a VRO2 pump (I guess part# 0175230)? Does anyone know if I can use this VRO2 pump to replace mine? Looking just...
Back
Top