captainbobc
New member
I have a Celebrity 18' bowrider and I am replacing all the wood in the structure..stringers, floor, and transom. I am removing the transom wood from the interior. The lower portion is easy to remove since it's rotten. The upper portion is a different story. There are two layers of 3/4" plywood sandwiched with one layer biaxial cloth covering, 3/8" thick glass transom and between the two plywood layers is another double layer of biaxial cloth. I am removing from the inside and saving the glassed transom.
Any great ideas on getting the solid wood out?
I am using an oscillating tool, flat bars, chisel, and am not moving along very fast. In other words, it is kicking my butt!
Any experience is appreciated.
Any great ideas on getting the solid wood out?
I am using an oscillating tool, flat bars, chisel, and am not moving along very fast. In other words, it is kicking my butt!
Any experience is appreciated.