Pressure over temperature sender

[budman67]

I was looking through my search results, people are saying
that a pressure sender is more important than a temperature
sender, but what I didn't see,was where to put it on the
motor.

They mentioned that the temperature sender should be at
the top of the head.

The motor is a 83' 115hp Mercury inline 6

 

[faztbullet]

Goes in same place and 15psi gauge is what you need....

 

[budman67]

Thanks, should I ,or can I run a tee fitting then for the two senders?

 

[budman67]

I take that as a no?

Anyhow, I bought new plugs, new gas/mix and a fresh charged battery.
Spins well, but no signs of life!!

 

[budman67]

I got it running,is this the right water flow, I thought it would stream
stronger than this?

 

[fastjeff]

That's plenty of flow. Looks like you have a small water jacket leak around # 1 plug. Okay if it doesn't get nay worse.

Jeff

 

[budman67]

Number One looked okay, but number two was lightly leaking, but stopped after video.