Logo

Operating without a shift cover?

DKaiser

Contributing Member
AQ120B/270

On a recent fishing trip, I lost the shift cover for my outdrive (very strange, it must have rattled loose - ?)

Any problems operating the boat - temporarily - until I can locate a used cover?

Thanks
 
I have heard (not verified) that without the cover, hydro dynamics can work against the eccentric piston seal, and in some cases will/can/may force water into the transmission.


.
 
Kim, Gary out of Bandon replaced U-joints last summer and did R&R on the trans.

Rick, that doesn't sound good. I'll get a cover before operating again. We did continue to operate without the cover for a few days while on our trip - other than checking the oil, is there another or better way to check to see if water has penetrated the eccentric seal?

Thanks
 
I seen lots in Alaska without the cover. I asked a guy why so many guys took the cover off.
I don't remember the answer but it didn't make any sense.
 
...........................

Kim, Gary out of Bandon replaced U-joints last summer and did R&R on the trans.
Was the eccentric piston seal replaced at that time? And if so, was the most current double lip seal used?

Rick, that doesn't sound good. I'll get a cover before operating again. We did continue to operate without the cover for a few days while on our trip -
other than checking the oil, is there another or better way to check to see if water has penetrated the eccentric seal?
Short answer.... NO.

Thanks
 
Rick, is there another term for the eccentric piston seal? - Shift cam seal, perhaps? Whether the most current seal was used or not, I do not know, I would hope so.

The work completed:

Go through upper gear
R&R Crosses
R&R Blue Seal and head washer
Set Vert Shaft Clearance .04
R&R Shift Cam seal
 
Rick, is there another term for the eccentric piston seal? - Shift cam seal, perhaps? Whether the most current seal was used or not, I do not know, I would hope so.

The work completed:

Go through upper gear
R&R Crosses
R&R Blue Seal and head washer
Set Vert Shaft Clearance .04
R&R Shift Cam seal
 
Back
Top