Operating coolant temperature range for Honda BF225

[Solitim]

Greetings: What is the normal coolant operating temperature range for Honda BF225’s? Mine are reaching 190 F (twin motors). New to me and can’t find in manuals. My rpm’s are kept about 2,800 and 3,100. Both motors have good tell tale water stream flow and no overheat alarms are being triggered. I just don’t know if that’s in the normal range. I bring back to lower rpm’s until cools down; again, new to these Hondas. Thanks and any direction given is greatly appreciated! (Tim in Prince William Sound).

 

[Heligeorge]

D model?
if yes they run around 190-200F.

 

[Solitim]

Thanks! I’ll double check if “D” model. Off top of my head, “A” model if I were to guess. What if another model; similar or big difference? Both engines are climbing similar rates. That is great to hear; again, thanks!

 

[Solitim]

P.S. in addition to equal climb in temps, tell tale water squirt pretty solid and no alarms.

 

[Heligeorge]

The D model is the latest model.
They run hotter than the older model I believe.

 

[Solitim]

Much appreciated; thanks!

 

[chawk_man]

As far as I know, all of the BF 225's block temp spec is 90 to 100 deg C (194 to 212 def F.)

The ECT alarm is triggered at around 110 deg C. (230 F)

 

[Solitim]

Thank you! Much appreciate the guidance. Within parameters; fishing here we come! Tim