Logo

Oil Issues

ssonnie

New member
I just bought a Trojan with 2

I just bought a Trojan with 2 454 Crusaders. The port side motor has some valve issues that I have surmised to be from a oil problem. This is my first inboard however I am very familiar with the the big block. I removed the oil filter turned the motor with no oil coming out. Does anyone know of a way to get to the oil pump with removing the block?
 
"Make sure the distributor is

"Make sure the distributor is turning. If it is, and the oil pump is not, then that block is coming out."
 
One idea is to remove the dist

One idea is to remove the distibutor and turn over the oil pump with an adapter using a drill motor.
You should get oil everyplace.
If not see post above
Sorry
Good Luck
Abouttime
 
"Sad to say I had seen this th

"Sad to say I had seen this thing with a leaking rear oil seal on a MAN diesel...$120.00 for parts, $14,000 for labor to lift the block out and replace everything"
 
Back
Top