Need help evinrude 115 v4 2 stroke

[JEFTA90]

I am rebuilding my engine and found this small hole below my piston rod. Will this effect my engine once I change sleeve, piston and rings. I had a bad piston and rings which caused the sleeve to break and potentially cause the hole. It is all internal but I dont want to buy the parts to fix the engine if this is going to be an issue.

 

[racerone]

Is the sleeve removed from that cylinder?. --Model # is?----Your location?

 

[JEFTA90]

Yes I removed it because it was busted. The hole im refering to is just below the opening in the shape of and oil light on a car dash

 

[JEFTA90]

Model is E115SLEDR

 

[JEFTA90]

U

Is the sleeve removed from that cylinder?. --Model # is?----Your location? Sorry im in jasper fl

 

[JEFTA90]

I removed the sleeve due to being damaged. I just want to be sure that the hole will not be able to compromise the engine before I add new parts.

 

[racerone]

You refer to the small hole just above the exhaust port?

 

[JEFTA90]

No the hole is towards the back of the photo where the piston rod goes out to attach to the crankshaft it looks like the oil light in most cars or a genies lamp

 

[JEFTA90]

I circled in the photo so you could see

 

[racerone]

Should not be an issue.----Find a good shop to fit a new sleeve or e-bay for a used block.

 

[JEFTA90]

Nice thank you I will take it to my buddies machine shop once I get a new sleeve