merc200dalarna
Contributing Member
Motor won't stay running more than 10 seconds.
Mercury four stroke 2003, 4hp, european sold, Serial nr: 0P228224 (Barely readable on sticker and block sticker)
Cleaned the carb and checked float and needle. Pull start got on my nerves, so I used my cordless drill.
It starts after I have primed it with the bulb on an external tank. Runs and responds to throttle for some time, then dies.
(Cannot be restarted unless I prime with bulb)
Will open the fuel pump tomorrow, but it seems I can only buy a whole 'fuel pump assy' and not gaskets/diphragm for the 2003 model?
Does any other (newer) pump fit, or where can I buy just the diaphragm or gasket set?
From Sweden.
Mercury four stroke 2003, 4hp, european sold, Serial nr: 0P228224 (Barely readable on sticker and block sticker)
Cleaned the carb and checked float and needle. Pull start got on my nerves, so I used my cordless drill.
It starts after I have primed it with the bulb on an external tank. Runs and responds to throttle for some time, then dies.
(Cannot be restarted unless I prime with bulb)
Will open the fuel pump tomorrow, but it seems I can only buy a whole 'fuel pump assy' and not gaskets/diphragm for the 2003 model?
Does any other (newer) pump fit, or where can I buy just the diaphragm or gasket set?
From Sweden.