Hi All,
I have a pontoon boat with a Honda BF150A4 (best I can tell.) It has a rough idle but seems to smooth out when underway. It appears that the previous owner replaced the air idlecontrol valve. I’ve replaced plugs, fuelinjectors, and fuel filters. While doingsome other work under the helm, I discovered the previous owner had also disconnectedthe alarm beeper. Sure enough, after re-connectingit, I’m getting an alarm after starting the engine that continues while drivingat speed. The engine does not shut downinto “limp mode”. I had the dealer put itonto the computer and he says the only code is for the heated O2 sensor. I’m hesitant to buy one before I’vetroubleshooted everything else because as you know, the O2 sensor is stupid expensive. Plus, I have another boat with a Honda BF90that was also throwing an O2 sensor code that continued to alarm after Ipurchased and installed a new sensor. The same dealer took that boat back in and said it was the wiring harness afterall (also stupid expensive). Any ideason what else I can check or troubleshoot before throwing a new HO2 sensor init? Any advice would be greatlyappreciated.
Thanks,
Andy
I have a pontoon boat with a Honda BF150A4 (best I can tell.) It has a rough idle but seems to smooth out when underway. It appears that the previous owner replaced the air idlecontrol valve. I’ve replaced plugs, fuelinjectors, and fuel filters. While doingsome other work under the helm, I discovered the previous owner had also disconnectedthe alarm beeper. Sure enough, after re-connectingit, I’m getting an alarm after starting the engine that continues while drivingat speed. The engine does not shut downinto “limp mode”. I had the dealer put itonto the computer and he says the only code is for the heated O2 sensor. I’m hesitant to buy one before I’vetroubleshooted everything else because as you know, the O2 sensor is stupid expensive. Plus, I have another boat with a Honda BF90that was also throwing an O2 sensor code that continued to alarm after Ipurchased and installed a new sensor. The same dealer took that boat back in and said it was the wiring harness afterall (also stupid expensive). Any ideason what else I can check or troubleshoot before throwing a new HO2 sensor init? Any advice would be greatlyappreciated.
Thanks,
Andy

