Logo

hey guys Love getting advice form this site, tricky one 90hp 1996 evinrude no flywheel nut

Pull the heads and inspect as it has no head gasket. If it has dropped a piston skirt it could have windowed the block at water jacket. If so block and all internals are junk.Also pull the oil screws on lower unit to see if full of water/rust or metal shavings...ya might get lucky.
 
Why the confusion here.---There is no flywheel nut on these 60 degree loopers !!-----Never was from the day they left the factory.----5 bolts are used for the flywheel along with a locating pin !
 
Last edited:
You need the puller kit as if you try using the flywheel bolts the will snap easily...


60degree.jpg
 
Back
Top