I want to change the fuel filter on the carb but can't seem to get a good grip on the nuts. The thermostat housing and the the sight hose from the fuel pump won't give me enough clearance to get two wrenches in there. I'm sure there is a filter in there and it looks like the nuts haven't been touched, until I tried and the ears started to peen over. What's the best way to get into it the motor is a 5.7 four barrel Rochester as far as I can tell. There is a water separator filter closer to the pump which won't be a problem. I need help with the inline paper one in the carb. Thanks once again.
Last edited: