Evinrude ETEC flywheel removal puller tool?
I want to be prepared for refurbing the flywheel.
I’m hopping a universal three prong puller is sufficient?
can I rent a all purpose (harmonic balancer) flywheel puller from the auto parts store to remove the FW on a 012 ETEC 175hp regular?
Flywheel Removal Tool screws in here what size bolt an thread type for the puller?
I’ve never removed an outboard flywheel (but have done a harmonic balancer an power steering pulley).
My new 012 ETEC has some rust on the crank so I’m suspicious of rust on magnets
I assume I can peak under flywheel while its still attached to crank to see if any magnets have shifted?maybe a angled mirror will show magnets?
Or I can even use the brail method to feel them out?
Part2: what are the flywheel part#s for my engine I see 5007033 fits 07 an newer engines (I believe my 175 is interchangable w/ 135,150,an 200) additionally I see this same P# fitting v4 115hp engines.
So what all FWs are interchangeable for my engine.
lastly for right now I assume the 5 mounting bolts press the FW back on? an if I mark the FW an block an put back same FW I removed the timing won't require adjusting? same ? for a differnt but same P# than removed FW?
Thanks for fly wheel removal an tips
I want to be prepared for refurbing the flywheel.
I’m hopping a universal three prong puller is sufficient?
can I rent a all purpose (harmonic balancer) flywheel puller from the auto parts store to remove the FW on a 012 ETEC 175hp regular?
Flywheel Removal Tool screws in here what size bolt an thread type for the puller?
I’ve never removed an outboard flywheel (but have done a harmonic balancer an power steering pulley).
My new 012 ETEC has some rust on the crank so I’m suspicious of rust on magnets
I assume I can peak under flywheel while its still attached to crank to see if any magnets have shifted?maybe a angled mirror will show magnets?
Or I can even use the brail method to feel them out?
Part2: what are the flywheel part#s for my engine I see 5007033 fits 07 an newer engines (I believe my 175 is interchangable w/ 135,150,an 200) additionally I see this same P# fitting v4 115hp engines.
So what all FWs are interchangeable for my engine.
lastly for right now I assume the 5 mounting bolts press the FW back on? an if I mark the FW an block an put back same FW I removed the timing won't require adjusting? same ? for a differnt but same P# than removed FW?
Thanks for fly wheel removal an tips
