"Most people want to add elect
"Most people want to add electric start not remove it...so this may be difficult to figure out without seeing the motor.
Generally...you will need the rewind starter, possibly a new flywheel, cerainly the starter pulley, recoil bracket and a neutral lockout cable and bracket if you want it. Last of all you will need a new hood, since yours does not have an opening for the pull starter.
I have never done this conversion and there are no kits that I know of. Changing from pull start to electric start, you need a new flywheel because the starter needs the teeth to turn it. I do not know if a change is necessary when going the other way..
Just the above parts cost about $800 plus the cost of decals for the hood. They would add another $100 or so.
Hopefully, someone else on the forum has done this and can tell you some work arounds. At least maybe for the hood."