Logo
FULL SITE MENU
J

jgmo

Outstanding Contributor From temecula, ca., usa
Joined
Last seen
Messages
4,889
Reaction score
1

Latest activity Postings About

    • J
      jgmo replied to the thread BF 20 won't start. Any ideas?.
      Sorry, I probably asked the wrong question. Getting ahead of myself. So, starting over..... To clarify, this doesn't have an...
    • J
      jgmo replied to the thread BF 20 won't start. Any ideas?.
      Hi, What is voltage from exciter coil while cranking?
    • J
      jgmo replied to the thread Honda BF50 efi VST removal.
      https://www.ebay.com/itm/334857587426 not sure this will you but it's a clear picture of what you're up against. good luck.
    • J
      jgmo replied to the thread BF 25 Cold Start flooding..
      Well, if you do end up removing the carb, make sure you hit all the vent passages (low speed, main and SE) on the Inlet mount flange...
    • J
      jgmo replied to the thread Honda BF225A No Start Journey.
      Yes, I couldn't find a six wire connector in the schematic with those wires either. It does list the trim connector as green though...
    • J
      jgmo replied to the thread Honda BF225A No Start Journey.
      Hi, I'm not saying I know anything useful here, just pointing out a couple of things. My eyes aren't so great these days so I could be...
    • J
      jgmo replied to the thread BF 25 Cold Start flooding..
      Hi, I'm not sure how the bystarter could flood the carb. I've worked on quite a few and haven't seen that before. Like you, I would...
    • J
      jgmo replied to the thread BF 25 Cold Start flooding..
    • J
      jgmo replied to the thread starts but won't go.
      Oops! I completely missed that it is a 15 A. Sorry! But...the spark plug/power balance check is still valid for this symptom.
    • J
      jgmo replied to the thread starts but won't go.
      Well....your answer of "had for about 20 years" doesn't help ME much because that is around the time Honda put out the D model and made...
    • J
      jgmo replied to the thread starts but won't go.
      Hi, Need a bit more info from you. Is this outboard brand new or used? If used, do you know what year or if it is an "A" or a "D"...
    • J
      jgmo replied to the thread Have a Honda 8D that drops a cylinder at idle..
      Yes, I watched the video and it does seem like it may be dropping a cylinder. I would want to pull the plug wires while thats happening...
    • J
      jgmo replied to the thread Have a Honda 8D that drops a cylinder at idle..
      Yeah....not surprising... ...I think a large portion of the population can't change a spark plug anymore. As my sweet ol' grandma used...
    • J
      jgmo replied to the thread Have a Honda 8D that drops a cylinder at idle..
      Hi, Simply comparing the looks of the plugs might give some info. If you haven't put new ones in for a while you might want to do that...
    • J
      jgmo replied to the thread bf200.
      Lock engine, remove #4 and 5 plugs. Pressurize 4 and listen at 5. Then Pressurize 5 and listen at 4.
    Show older items
  • Loading…
  • Loading…
Top