Logo
FULL SITE MENU

513031 Evinrude V6 Timing Wheel Encoder

SS502 said:
Apparently the Evinrude/Johnson timing wheel encoder PN 0513031 or 513031 for the 1991 V6 engine has not been available for a while. Well, I needed one so I went ahead and made my own. This one should last a while longer than the flimsy plastic stock encoder since this one is made from 6061 billet aluminum. I wonder how many '91 engines have been junked because of Evinrude's killing of this critical part. If anyone out there needs one, PM me and we can make that old engine run again.

View attachment 28418

-Charlie
Click to expand...
Hi! I'm looking for one. Let me know if you still have it. Thanks in advance.
 
SS502 said:
Apparently the Evinrude/Johnson timing wheel encoder PN 0513031 or 513031 for the 1991 V6 engine has not been available for a while. Well, I needed one so I went ahead and made my own. This one should last a while longer than the flimsy plastic stock encoder since this one is made from 6061 billet aluminum. I wonder how many '91 engines have been junked because of Evinrude's killing of this critical part. If anyone out there needs one, PM me and we can make that old engine run again.

View attachment 28418

-Charlie
Click to expand...
 
Joan said:
Hello, I am extremely interested in purchasing one or two. Please let me know how to proceed. Thank you
Click to expand...
I'm not making any of the aluminum parts at the moment. I can 3d print a similar part that will work fine. The only difference is there are no timing marks on it, but it is very functional. The 3d printed ones are $60 each plus shipping. I expect to make a few of the aluminum parts in November. They run $200 each. There is a lot of work in making them. Let me know how you want to proceed. Thank you for your inquiry. I had no idea these would help keep some of these older engines alive.
 
Hello, That is great news !! I would like to order one of the 3d printed kind. Please let me know how to proceed. Thank you
 
SS502 said:
Apparently the Evinrude/Johnson timing wheel encoder PN 0513031 or 513031 for the 1991 V6 engine has not been available for a while. Well, I needed one so I went ahead and made my own. This one should last a while longer than the flimsy plastic stock encoder since this one is made from 6061 billet aluminum. I wonder how many '91 engines have been junked because of Evinrude's killing of this critical part. If anyone out there needs one, PM me and we can make that old engine run again.

View attachment 28418

-Charlie
Click to expand...
Contact me about 513031

817 988 5690. Clark
 
SS502 said:
Apparently the Evinrude/Johnson timing wheel encoder PN 0513031 or 513031 for the 1991 V6 engine has not been available for a while. Well, I needed one so I went ahead and made my own. This one should last a while longer than the flimsy plastic stock encoder since this one is made from 6061 billet aluminum. I wonder how many '91 engines have been junked because of Evinrude's killing of this critical part. If anyone out there needs one, PM me and we can make that old engine run again.

View attachment 28418

-Charlie
Click to expand...
I need one. Mark text me 9857721404
 
SS502 said:
I'm not making any of the aluminum parts at the moment. I can 3d print a similar part that will work fine. The only difference is there are no timing marks on it, but it is very functional. The 3d printed ones are $60 each plus shipping. I expect to make a few of the aluminum parts in November. They run $200 each. There is a lot of work in making them. Let me know how you want to proceed. Thank you for your inquiry. I had no idea these would help keep some of these older engines alive.
Click to expand...
I would like to order one please. Mark 9857721404
 
SS502 said:
Apparently the Evinrude/Johnson timing wheel encoder PN 0513031 or 513031 for the 1991 V6 engine has not been available for a while. Well, I needed one so I went ahead and made my own. This one should last a while longer than the flimsy plastic stock encoder since this one is made from 6061 billet aluminum. I wonder how many '91 engines have been junked because of Evinrude's killing of this critical part. If anyone out there needs one, PM me and we can make that old engine run again.

View attachment 28418

-Charlie
Click to expand...
 
SS502 said:
I'm not making any of the aluminum parts at the moment. I can 3d print a similar part that will work fine. The only difference is there are no timing marks on it, but it is very functional. The 3d printed ones are $60 each plus shipping. I expect to make a few of the aluminum parts in November. They run $200 each. There is a lot of work in making them. Let me know how you want to proceed. Thank you for your inquiry. I had no idea these would help keep some of these older engines alive.
Click to expand...
I also need one of them time en coders how do I get in contact with you so I can pay
 
SS502 said:
Apparently the Evinrude/Johnson timing wheel encoder PN 0513031 or 513031 for the 1991 V6 engine has not been available for a while. Well, I needed one so I went ahead and made my own. This one should last a while longer than the flimsy plastic stock encoder since this one is made from 6061 billet aluminum. I wonder how many '91 engines have been junked because of Evinrude's killing of this critical part. If anyone out there needs one, PM me and we can make that old engine run again.

View attachment 28418

-Charlie
Click to expand...
Are you still making the bullet aluminum i been in search of one for a while
 
Call Charlie. (321) 403-6870 he makes them fo 91’s. Great guy, has 3D printed ones which I bought and works perfectly or Aluminium. Tell him Mark in LA sent you.
 
Yes, I still make both. I have a billet one and printed one I can ship tomorrow. Let me know your preference. Thanks
 
SS502 said:
Apparently the Evinrude/Johnson timing wheel encoder PN 0513031 or 513031 for the 1991 V6 engine has not been available for a while. Well, I needed one so I went ahead and made my own. This one should last a while longer than the flimsy plastic stock encoder since this one is made from 6061 billet aluminum. I wonder how many '91 engines have been junked because of Evinrude's killing of this critical part. If anyone out there needs one, PM me and we can make that old engine run again.

View attachment 28418

-Charlie
Click to expand...
Mr Charlie How do I get one of these?
 
SS502 said:
Apparently the Evinrude/Johnson timing wheel encoder PN 0513031 or 513031 for the 1991 V6 engine has not been available for a while. Well, I needed one so I went ahead and made my own. This one should last a while longer than the flimsy plastic stock encoder since this one is made from 6061 billet aluminum. I wonder how many '91 engines have been junked because of Evinrude's killing of this critical part. If anyone out there needs one, PM me and we can make that old engine run again.

View attachment 28418

-Charlie
Click to expand...
Do you still make the Evinrude/Johnson timing wheel encoder PN 0513031? We are Diana Boat Repair in Northeast Texas. We have a young high school student, who's boat is with us for repair. We are in need of this part to finish his repair work. Please let me know. I can be reached at 903-720-7994, Gail Niver, Co-Owner of Diana Boat Repair.
 
Back
Top