jasonbradmorris
New member
The issues I'm having is the motor will go down by itself when running in the water and also it will not trim up when I'm running it in the water. When I slow down (no load) it will trim up and down normal. So I trimmed the motor up and manually pushed down on the motor and it slowly goes down. I checked my cap. It was tight. I checked my fluid. It was at the appropriate level. The motor works fine. The cylinder goes up and down just fine. It is only an issue when the cylinder is under a load. The tilt/trim unit is on my Bass Tracker 175tw. I have never had a bit of problems out of it. I need all of the help that I can get. It was fine one day and not the next. Thank you