2006 Evinrude 115 e-tec

[Joann]

Motor was running fine then it just died. When we tried to crank it all out would do is click. We checked battery and changed starter and solenoid. All it will do is click. Any ideals what the problem is?

 

[Boobie]

Check ALL your battery cables and connections.

 

[Joann]

Check ALL your battery cables and connections.

We did that and cleaned them

 

[mechanicman]

Do a voltage drop test. Make sure you have battery voltage on both sides of the solenoid.

 

[faztbullet]

Could be a bad PDP.....

 

[Joann]

I checked and the voltage is dropping to below 3 volts