Howdy! New here and new to this boat. I picked up a 2001 Centurion Concourse to make some memories with the kids.
boat has a vortec 350 with that Black Scorpion injection. Long story short, the guy I got the boat from told me the boat melted down a plug in cylinder eight and now that cylinder has low compression. I threw a bore scope in it and the cylinder had some pretty bad gouging on the cylinder walls
so I’m looking for a long block so I can swap it out and get some fun out of it this summer. This is where I’m running into trouble. The casting on the block in there is 10243880 (MERC TAG NUMBER :L674155). I found a bunch of “880” long blocks but they’re all rated at 260hp and from what I’ve read this “black scorpion” engine is rated at 330hp. I doubt slapping that injection on the top is going to add 70hp, but I could be wrong… the second option I’ve come across is a 383 that’s rated at 346hp, but I don’t know if I can just slap that injection on a 383 as I’m not sure how you’d tune it.
I plan to call mercruiser on Monday when they’re open and see what they say, but any pointers from you guys would be super appreciated.
these are the engines I’m looking at
the “880” 260hp engine:
summitracing.com/parts/hme-vmh4#
the 383:
summitracing.com/parts/hpe-hp90
boat has a vortec 350 with that Black Scorpion injection. Long story short, the guy I got the boat from told me the boat melted down a plug in cylinder eight and now that cylinder has low compression. I threw a bore scope in it and the cylinder had some pretty bad gouging on the cylinder walls
so I’m looking for a long block so I can swap it out and get some fun out of it this summer. This is where I’m running into trouble. The casting on the block in there is 10243880 (MERC TAG NUMBER :L674155). I found a bunch of “880” long blocks but they’re all rated at 260hp and from what I’ve read this “black scorpion” engine is rated at 330hp. I doubt slapping that injection on the top is going to add 70hp, but I could be wrong… the second option I’ve come across is a 383 that’s rated at 346hp, but I don’t know if I can just slap that injection on a 383 as I’m not sure how you’d tune it.
I plan to call mercruiser on Monday when they’re open and see what they say, but any pointers from you guys would be super appreciated.
these are the engines I’m looking at
the “880” 260hp engine:
summitracing.com/parts/hme-vmh4#
the 383:
summitracing.com/parts/hpe-hp90

