Logo

Search results

  1. 0

    DIY work on my 93 271 502 B1

    I ran out of time to fix this, and haven't had the boat out because the weather in NJ has sucked for almost 6 weeks. Rain, floods, trees down, hurricane Irene, and even a minor earthquake. In any respect, I have a lot of maintenance to do on the Formula, and still have it at home. Anyone ever...
  2. 0

    DYI transom R&R Bravo 1

    How does my gimble ring look? Hacked it with a sawsall, which is my favorite tool. I don't think it's dead yet, but need a second opinion. https://picasaweb.google.com/02603sec/Jul62011TransomMaintenance?authkey=Gv1sRgCJaA4a-n8JvciQE#
  3. 0

    Proper Trailer/boat adjustments

    I have a 27 Formula SR-1 on a 32' Load Rite Trailer with rollers. The rollers are set on 2 pivot points. My skeg has about 15” to ground clearance, lowest point in the stern is 18”. The bottom of the bow sits about 27” above ground clearance. I’ve had the boat for about 4 years and I don’t...
  4. 0

    502 MPI gen V diagnostic

    Hi Saturday morning was my first time out this year. 271 Sr-1 502 gen V bravo 1. It fires on the first crank. Let it warm up to 175, and oil pressure is pretty much around 40-60. WOT 5000 rpms, it runs about 52 mph on my 22P B1 (GPS). Being quite pleased with the way it's running I put 10 gals...
  5. 0

    502 MPI Bravo 1

    1993 with a 1995 Gen V 502 MPI Bravo One Formula 271 SR-1. 420 hours on boat and 270 on motor. some salt, some brackish. Put 12 hours on it last week, in salt. It has all fresh gas, oils and batteries. And has been flushed. It's hard to get used to the 'slow crank' before she fires, sounds...
  6. 0

    Leaking through bellows Bravo 1

    502 MPI Bravo 1. Water is coming in through the bellows. My gimble is not making any noise, but my trim limit senders need replacement. I also need my skeg repaired. I have a Bravo 1 service manual I have been "done in" by "diy" in the past. The job looks easy enough, except for...
  7. 0

    Mercruiser 502 EFI Harness

    "A+B are the terminals on "A+B are the terminals on top of the slave solenoid. A is red B is yel/red. I have a circuit breaker on the starter, which has 2 wires red/pur and ORNgoes to alt), The top breaker, in the box with solenoid aka slave 50A has 3 wires, red, red/pur and red. the...
Back
Top