Logo
FULL SITE MENU

Search results

  1. F

    How to remove rectifier from 2002 Yamaha HPDI?

    I need to replace the rectifier/generator and there a bolt behind fuse panel. Fuse panel is attached to fuse box and there are bunch of screws on fuse panel and hare to tell which ones I have to remove. Does anyone has a picture from service manual showing how fuse panel attached to fuse box...
  2. F

    5.0 LX 1987 mercruiser starter problem

    Have not fixed the timing problem and now have a new problem. When I turn the key, pinion engages and crank turns some from 1/8 turn to full turn and then crankshaft stops and grinding noise starts. Thought starter is bad and this time bought a merc $250 starter. Same thing. here is what I have...
  3. F

    5.0 LX 1987 mercruiser timing

    I need help to do timing. this engine has ignition module inside the distributor. using timing light, I set it to 8 degrees before TDC at 750 rpm and it does not runs good and backfires through exhaust. it runs much better when set at like 20 degrees advance. Very confusing because manual calls...
  4. F

    5.0L Merc bogging down at 3000 rpm

    Hopefully someone had this problem and can help, running out of things to check my 1989 Merc 5.0L on 24 foot Rinker starts good, idles good, runs good until 3000 rpm. When I open throttle more, rpm just does not change, secondary throttle opens, secondary inlet valve also opens, I see lots of...
  5. F

    yamaha 8 hp tilt problem

    My 8 hp kicker T8 yamaha tilts down fine but does not tilt up. I can tilt it up 1/2 inch at a time each time I press tilt up switch. Motor runs, oil level is ok, took it apart and changed all the seals and o-rings and still does the same thing for tilting up. Also, even oil level is fine, oil is...
Back
Top