I have a 35 hp Mercury that is peeing extremely hot water, with exhaust gasses. There is smoke rising from the ground where the water lands. I "believe" the head gasket is blown. I have 95 pounds compression on both cylinders with no apparent leak down. From what I can find online, it is...
Hey Guys and Gals,
I will follow with problem info in a sec, but first let me mention that I have posted on this site before and you all were a great help. Thanks in advance for your help. This will be a long post but please bear with me.
Basic info: 1986 35HP electric start, motor # A151442...
I just bought an 86 model Alumacraft with a 35 hp Mercury ( 86 model also). At first the motor did not have spark. I posted on this forum a couple of times and the motor runs fine now. I knew that since I had turned the engine over so often that I would need to replace the impeller. The...
Can someone give me some information on the small switch assembly located on the port side of the mercury 35 hp electric start? I am having spark issues and I am not familiar with this part. It is slightly smaller than a "C" size battery and has two wires. One goes to ground and the other...
I have this 1986 mercury 35 hp electric start outboard ( engine # A151442). I "think" I had no spark. I tested the coils and they tested good. I tested trigger with DVA and I get a good jump on my meter. I replaced the stator with a new one. It tests good also. Each time I tested for...
I have a 35hp Mercury engine with electric that has multiple issues. As a quick lead in, this motor has set up for over 6 years. I sea foamed the cylinders before turning over by hand at the prop. The motor is not seized and seems to have good compression and will crank over but no start. It...