Logo
FULL SITE MENU

Recent content by Naisy

  1. N

    Cooling water outlet

    Mercury Marine Outboard Serial Range 800 (4 CYL.), 80 (4 CYL.) 8050200 THRU 8067014 Still having running issues and now think the motor could e overheating..!! I put it the water recently and it starts okay. The impellor seems okay as the pee hole was discharging water well but I noticed water...
  2. N

    What's This ???

    It's not a wire on further examination.... it is an open line. Perhaps some sort of pressure relief or ??? Anyway it seems to have broken off from somewhere that I am still not sure of where but don't know that this is causing my biggest problem which is that the motor bogs right down and...
  3. N

    What's This ???

    Sorry ... The motor is 1980, Mercury Power Trim 800-4-cyl-80-4-cyl model 8050200-thru-8067014 Aus. The top end of the wire connects into the side of the Elbow and the other end was just hanging down touching the floor pan. I've looked for somewhere it might have come out from or connected to...
  4. N

    What's This ???

    Okay, pardon my ignorance as I don't even know what these parts are called but need some help please. After having all sorts of engine problems I pulled both carbies off to clean them. Behind the carbies I noticed a blue wire coming from the bottom of what looks some type of hose connecting...
  5. N

    Thermostat Locate Where??? Mercury Outboard 800 (4 CYL.), 80 (4 CYL.) Serial Range 8050200 THRU 8067014 [AUS

    I was hoping someone would confirm that cos it was doing my head in Thanks mate
  6. N

    Thermostat Locate Where??? Mercury Outboard 800 (4 CYL.), 80 (4 CYL.) Serial Range 8050200 THRU 8067014 [AUS

    Please anyone, where the hell do I find the thermostat on the motor described above.. It is not shown or nominated on any of the parts diagrams so I am scratching my head
  7. N

    Mercury 80hp Power Trim - Carburetor Jet Is Flooding

    Can someone confirm my suspicion or know of another reason that fuel bubbles out of the jet that sits in front of the ventura when the motor is running? I suspect the needle is stuck open or the float is stuck but have pulled it apart and cleaned it 2 or 3 times but hasn't fixed the problem...
  8. N

    Mercury 80 hp Power Trim 8050200 - 8067014 (Australia) Carburetor Flooding

    Can someone confirm my suspicion or know of another reason that fuel bubbles out of the jet that sits in front of the ventura when the motor is running. I have circled on the attached photo Anyway I think it is either the needle sticking open or the float is stuck or both? I don't know why this...
  9. N

    Ignition Switch

    Awesome man.... I cannot thank you enough. Cheers
  10. N

    Ignition Switch

    Hi Faztbullet, The ignition abovce only has 4 points and the one I want to replace has 5 points as per the pic. Do you know if there Is there a 5 point ignition available
  11. N

    Ignition Switch

    Hey there, my name is Steve Can anyone help me or tell me how to find a replacement keyed ignition switch for my motor which I am not sure of the year but think it is around the 80's ?? It is a Mercury (blue band) 80 hp 4 cylinder 2 stroke Power Trim with a serial number of 8054095. The...
  12. N

    mecury 800 power trim wont go up

    I've seen the release knob so will give it a go. The trim motor only turns when down and nothing when going up
  13. N

    mecury 800 power trim wont go up

    Hi, could some one please tell me why my trim will go down but has no power when try to raise it. Is it the solenoid? and also can it be raised manually so that it can be towed without scraping the road
  14. N

    Cant Pull Motor Over With Plugs In

    Hi All, I hope someone can help me. I took my motor to a mechanic as I was having rev's and flooding problems. After he tinkered with it he told me that he couldn't find the cause and that likely it was the top or bottom seal. I replaced the bottom seal and when I tried to pull the motor over i...
See more
Back
Top