Logo
FULL SITE MENU
M

MartinZ

Member
Joined
Last seen
Messages
25
Reaction score
0

Latest activity Postings About

    • M
      MartinZ replied to the thread Johnson CD-12 final inches problems.
      Can't remember if I put a head gasket in this one or not. I can check compression. It starts easy with one pull every time, so I doubt...
    • M
      MartinZ replied to the thread Johnson CD-12 final inches problems.
      I got the coils adjusted so they aren't rubbing anymore, and the spark advance doesn't jump around like it did. I got the impeller...
    • M
      MartinZ replied to the thread 2001 BF15A project.
      That "alternative" pinion gear is from a 2hp with an 11mm shaft. The 15 has a 15mm shaft. It won't work.
    • M
      MartinZ replied to the thread 2001 BF15A project.
      I don't know if I trust google on this one. This alternative pinion is from a 2hp engine. I'll check with the local Honda dealer and see...
      • 1782530392391.png
    • M
      MartinZ replied to the thread 2001 BF15A project.
      I cannot find this extended Honda model number anywhere on the motor. All it has is BF15A, but not the rest of the identifiers. I think...
      • 1782526602634.png
    • M
      MartinZ posted the thread 2001 BF15A project in Honda Outboard Forum.
      Just brought home this 15. Seller said it was a 2006, but that's because it says 2006 on the emissions sticker on the cowling. Looking...
      • photo_2026-06-26_20-34-31 (2).jpg
      • photo_2026-06-26_20-34-31.jpg
    • M
      MartinZ replied to the thread Johnson CD-12 final inches problems.
      Thank you. I'll try that.
    • M
      MartinZ replied to the thread Johnson CD-12 final inches problems.
      Yep, that'll do it. Didn't realize you have to remove the powerhead to get the lower unit off. Guess I'm in for some new seals and...
      • photo_2026-06-22_20-52-37.jpg
    • M
      MartinZ posted the thread Johnson CD-12 final inches problems in Johnson Evinrude Outboard Forum.
      I have a CD-12 that I am working on and have a few problems to figure out. One of them that I think is serious is the way the spark...
      • 1782175534242.png
    • M
      MartinZ replied to the thread Johnson RDE 17R repair.
      I have a 2 line tank that I rebuilt for my 5.5 (it still leaks anyway) but if I get this motor running, I will add a fuel pump to it.
    • M
      MartinZ replied to the thread Johnson RDE 17R repair.
      I got it apart. The top cylinder looks much worse than the bottom. I'll get big bucket of solvent or parts cleaner and dunk everything...
      • photo_2026-05-10_18-58-03.jpg
      • photo_2026-05-10_18-58-04.jpg
      • photo_2026-05-10_18-58-04 (5).jpg
      • photo_2026-05-10_18-58-04 (4).jpg
      • photo_2026-05-10_18-58-04 (3).jpg
      • photo_2026-05-10_18-58-04 (2).jpg
      • photo_2026-05-10_18-58-03 (3).jpg
      • photo_2026-05-10_18-58-03 (2).jpg
      • photo_2026-05-10_18-58-02.jpg
    • M
      MartinZ replied to the thread Johnson RDE 17R repair.
      I'm hopeful it's just cosmetic and it will clean up. If not, I can make my money back just by selling the electric starter. I have a 5...
      • five and half.jpg
    • M
      MartinZ replied to the thread Johnson RDE 17R repair.
      Spent a little more time on it today. The lower shifts correctly. Next step is get the magneto off the top and split the case. Not too...
      • photo_2026-05-08_21-25-23.jpg
      • photo_2026-05-08_21-25-24.jpg
      • photo_2026-05-08_21-31-30 (2).jpg
      • photo_2026-05-08_21-31-30.jpg
      • photo_2026-05-08_21-25-23 (2).jpg
    • M
      MartinZ replied to the thread Johnson RDE 17R repair.
      Location is Texas. If it turns out to be a mess, I don't know if I will rebuild or part it out. Haven't decided yet. Don't see very many...
    • M
      MartinZ replied to the thread Johnson RDE 17R repair.
      Just remembered this model usually has the bad seal, so I will have to tear it all the way down anyway.
    Show older items
  • Loading…
  • Loading…
Back
Top