Logo
FULL SITE MENU

Recent content by Littlepudge14

  1. L

    Omc remote control accessory wiring

    I have a 1982 Johnson 75HP with a late model mechanical shift remote control. One wire from the accessory plug that is grey which I know is for the tach. However there is a purple wire that turns on with the ignition switch but only gets 6 or 7 volts when turned on. Not sure what this would be...
  2. L

    1982 Johnson 75Hp dies randomly after 3/4 throttle

    Hey guys. So I have a 1982 Johnson 75 J75TLCNB that I rebuilt myself with all new everything; pistons, rings, wrist pins, bearings, seals, 1 new con rod, new spark plugs, carbs were cleaned and rebuild with new gaskets, fuel pump was recently rebuilt, etc (except the thermostat which tested fine...
  3. L

    Lower unit shift rod length

    Hey guys. i have a 1982 Johnson 75HP J75TLCNB. i am installing the lower unit on a newly rebuild power head. I’m wondering what the distance from the center hole on the shift rod to the top mating surface of the lower unit should be. thanks, Ryan
  4. L

    Crankshaft tolerances?

    Hi all, i have a 3 cyl 75hp Johnson model: J75TLCNB I’m wondering what the crankshaft tolerances are for the crankshaft journal where the connecting rod sits. Also can you order bigger sized roller bearings somewhere for the connecting rod to crankshaft?
See more
Back
Top