Logo
FULL SITE MENU

Recent content by jeffreybandel

  1. J

    BF115a No start voltage issues.

    I haven't found a wiring diagram yet. I now have 12volts coming out of the blue/yellow striped wire on the main relay. I don't have any voltage going to the blue/yellow striped wire on the fuel pump. I tested it for continuity but got no resistance.
  2. J

    BF115a No start voltage issues.

    I am working on my dads motor. It died on him on the lake and had to get it towed in. I have fuel to the high pressure pump. It is not pumping. I am only getting 7.9 volts from the battery switch to the starter. Also, all three fuses are at 7.9. I have a strong 12.8 from the battery to the...
  3. J

    2000 BF115A Gear Shifter Rod

    I have to be missing something. Do I have to remove the cover?
  4. J

    2000 BF115A Gear Shifter Rod

  5. J

    2000 BF115A Gear Shifter Rod

    I can't get pliers on it or a hammer in that small area.
  6. J

    2000 BF115A Gear Shifter Rod

  7. J

    2000 BF115A Gear Shifter Rod

    Bob, Are you saying put a pair of pliers on the bottom of the shift shaft and hit down with a hammer and it will come out?
  8. J

    2000 BF115A Gear Shifter Rod

    The server won't let me post any pictures because they are too large for the server to process.
  9. J

    2000 BF115A Gear Shifter Rod

    I am at my dad's working on the boat. I'm not having success getting the gear shifter off. I think it is jammed way up in there.
  10. J

    2000 BF115A Gear Shifter Rod

    Thanks a bunch for the help. He is a few hours away. I'll be back there for the 4th of July. It look like I will order #12, #13 and maybe 32.
  11. J

    2000 BF115A Gear Shifter Rod

    I thought about filing it, but over 30% of the id of the receiver are flat. It depends on how hard it is to replace the receiver. If it is a huge job, I would prefer to replace it.
  12. J

    2000 BF115A Gear Shifter Rod

    I believe that is it.
  13. J

    2000 BF115A Gear Shifter Rod

    A boat repair guy came out and installed a water pump impeller on my dads boat. Now it won't go into reverse or forward. I took off the lower unit and discovered the female end of the shift rod lever (I think that is what it is callled) was all boogered up. I think it was forced back on. It...
  14. J

    Helping My Dad on BF115A

    This was an easy job and got it running again.
  15. J

    Helping My Dad on BF115A

    I bit the bullet and bought the upgrade kit. Boatsnet wanted close to $1,000. I got it from hondaofsouthgeorgia for $699. This looks like a straight forward job. If anyone has done it and has some pointers, I would appreciate learning them.
See more
Back
Top