Logo
FULL SITE MENU

Recent content by idler

  1. I

    Battery set up for new Ulterra 112#

    I've never had a trolling motor that needed multiple batteries so I have lots of questions. In any session of fishing, I doubt it will run for more than 3 hours before recharging. What do you guys think about one 36 V or three 12V in series? I'm hoping for all the pros and cons of each...
  2. I

    Mounting plate for new Ulterra

    I'm having no luck finding a mounting plate for the front of my pontoon. I want to mount my Ulterra in front and outside the gate. And I need it to be mounted crosswise (perpendicular to the pontoon). After it's deployed, I want to be able to pivot it so its pointed parallel to the pontoon so...
  3. I

    New water pump kit installed.....won't pump water!

    Thanks guys. I got it pumping. The old impeller actually looked pretty good. Took it apart. I had the gasket on backwards. Don't know how that could have made a difference. The stainless puck that the impeller sits in didn't fit real good and either did the grommet on top. I switched...
  4. I

    New water pump kit installed.....won't pump water!

    So I installed a new water pump kit in me 35 Johnson J35qleca and it wont pump water. I've installed many water pumps over the years and never had this problem. What could I have done wrong? Couple questions...I don't want to run engine too long waiting for water out of the tell tale. How...
  5. I

    Shifting problems on a 1998 Johnson J35QLECA

    Ok thanks. I'll look in the control box.
  6. I

    Shifting problems on a 1998 Johnson J35QLECA

    Won't shift into gears. When I started it up for the season, it would stay in reverse gear no matter the position of the remote lever. When I disconnect the upper shift rod from the lower, I can manually move the lower shift rod into gear so I believe the lower unit is good. When I reattach the...
  7. I

    35 Johnson in reverse no matter where the remote shift lever is...please help!

    Thanks Racerone!
  8. I

    1998 johnson 35 hp difficulty getting upper shift rod to thread

    Hi myirishwaltz, wondering if you ever got that shift rod threaded back on. I have a similar problem and what you found out might help me. Thanks.
  9. I

    35 Johnson in reverse no matter where the remote shift lever is...please help!

    I haven't been able to drain the lower yet but I did remove the water pump screen. The upper rod is disconnected from the lower rod by about ⅛ inch. Neither rod moves up or down. https://photos.app.goo.gl/MbDajhJxnSctF1m98
  10. I

    35 Johnson in reverse no matter where the remote shift lever is...please help!

    I'll check that and let you know. Thanks.
  11. I

    35 Johnson in reverse no matter where the remote shift lever is...please help!

    Sorry, 35 Johnson 1998 I believe. J35QLECA
  12. I

    35 Johnson in reverse no matter where the remote shift lever is...please help!

    Hey guys, so I launched a boat I haven't used for a couple years. started right up...runs great! But it started backing out of the landing even though the remote lever was in neutral. I shifted to forward but still in reverse. I shifted to reverse...no changed. So its in reverse no matter...
  13. I

    4 hp Mercury Main Jet Question

    So I've been looking for a new main jet for this engine, Serial # 0B100631. I found one and ordered it, part # 3026. Problem is it doesn't come with a washer. I can't find one anywhere. Does anyone know where I can get one, do I need one, can I make one? Is it brass, copper, rubber or...
  14. I

    Can't find parts for older Mercury 4 hp serial # 0B100631 Please help!

    Thanks for all the help guys. I'm still not sure about the gasket for this main fuel jet. Does anyone know if this is a copper gasket or a rubber type gasket? Thanks.
  15. I

    Can't find parts for older Mercury 4 hp serial # 0B100631 Please help!

    I don't know the part number. On the expanded view of the tillotson carbon, it is identified as part 32. But when you scroll through the list of parts, it skips from 31 to 34. Probably because it's not available. So there is no part number listed. Thanks again.
See more
Back
Top