Logo
FULL SITE MENU

Recent content by Cfoss2010

  1. C

    Honda 50hp throttle control box suggestions

    Fixing up an old pontoon, starting with the throttle control box and cable back to my 50hp Honda outboard. Any suggestions? Getting mixed reviews on most products I’ve viewed. Thanks in advance. I’m
  2. C

    where to buy carb rebuild kit

    can't seem to find one for 866140001 but not great with the internet any help?
  3. C

    Stalling/bogging issues

    3.0 merc ran fine past 2 years. Still starts right up first turn but starting to have some bogging issues this year. Still on my first tank of gas which was mixed with stabilizer so not sure if that would cause anything but this year when I throttle up it starts to bog out other times it goes...
  4. C

    Oil filter/type of oil 3.0 merc

    New to boats so go easy on me or make fun of me whatever works. First time changing the oil on my 06 185 bayliner 3.0 alpha 1 merc Whats the best recommended oil filter and type of 4stroke oil to use? Without my owners manual and knowledge of using the internet I cannot find the correct...
  5. C

    Trim not working

    Got back to the dock and my trim wasn't working. I have an 06 bayliner with 3.0 merc alpha 1 i/O SAE J1171. The fuse is fine(replaced it just to check) and my connections are tight. I unplugged the quick connect and saw that im getting 12v to all 3 terminals at the same time. Is this a motor...
  6. C

    No power

    I have a bayliner 3.0 merc alpha 1 i/o and the boat seemed to be running fine then completely shut off. Turning the key i get nothing at all. Battery is fine, blower and pump both work. Anyone know what would cause this? Had to put the trim up manually
  7. C

    Neutral issue

    This is a follow up on a previous post i made a little while back . Issue- when the boat is in the water and i shift from forward back into neutral it makes a fast grinding sound. No sound in forward or reverse. Only when i put it in neutral in or out of the water. Runs fine in neutral when i...
  8. C

    Grinding noise in neutral

    I just bought a 06 bayliner 3.0 merc alpha 1 i/o. It just got completely serviced and at the dealership seemed to be no issues. Started right up and turned it off. brought it home put some muffs on it, started right up idled in neutral just fine, shifted into forward fine, rev’d it a little...
  9. C

    Carb leaking fuel. Help Pictures

    I did a full soak on all 3 of my carbs, placed them back them primed fuel them them before starting and the middle one is leaking fuel out of the nipple in the front. Does anyone know why or what causes this? How to fix?
  10. C

    1990 mariner 50hp problem HELP

    First off im new to outboards and dont have much experience with motors besides help from youtube and the internet Not sure if the older mariner are considered to be yamaha but it says mariner so besides that, I recently bought this 2stroke 50hp outboard for a small fishing boat from a local...
See more
Back
Top