Logo
FULL SITE MENU
C

CaptJoe3

Member
Joined
Last seen
Messages
21
Reaction score
0

Latest activity Postings About

    • C
      CaptJoe3 replied to the thread Overheating issues.
      We're going to take a run to get temp data at 2500 and 3500. Last resort I'm thinking of ordering a new heat exchanger. Nightmare would...
    • C
      CaptJoe3 replied to the thread Overheating issues.
      I wasn't getting testy. Both me and my mech are very frustrated and seeking any input towards something we may have missed or are not...
    • C
      CaptJoe3 replied to the thread Overheating issues.
      Re: Clear hose. Mech. believes thee clear cap on strainer gives that info. Wants to try a clear hose "into a clear cylinder with "headspace"
    • C
      CaptJoe3 replied to the thread Overheating issues.
      The sherwood pump was overhauled using the major repair kit. Shafts were ok so not replaced, just cam, bearings, seals, wear plate. My...
    • C
      CaptJoe3 replied to the thread Overheating issues.
      Have not done a clear hose test. Raw water pumps were rebuilt at repower in 2023. Only 100 hours on them. Will try to get data at 2500...
    • C
      CaptJoe3 replied to the thread Overheating issues.
    • C
      CaptJoe3 replied to the thread Overheating issues.
      Just got off the phone with my mechanic. Heres the correct info. Raw water flow was 4 gal in15 sec @2000. IR Temps: Testing underway @...
    • C
      CaptJoe3 replied to the thread Overheating issues.
      I will double check. I was going from memory on flow.
    • C
      CaptJoe3 replied to the thread Overheating issues.
      Hello Mako, been distracted. I never answered your question. Long blocks new in 2023, all accessories inspected, tested...
    • C
      CaptJoe3 replied to the thread Overheating issues.
      Steady stream of water coming through intake and strainer, no air. Elbows and risers were new in 2023. Will have to talk to mechanic...
    • C
      CaptJoe3 replied to the thread Overheating issues.
      I believe so, but this was resolved with new gasket.
    • C
      CaptJoe3 replied to the thread Overheating issues.
      Thank you! We had bubbles in strainer and opened it up, cleaned and sealed and still overheats.
    • C
      CaptJoe3 replied to the thread Crusader 1996 454XLT Hot start problems (ECUs issue?}.
      Forgot to mention, my engines are 454XL TBis, 1993 and 1994. Only one had the problem (starboard, Reverse rotation) We are convinced it...
    • C
      CaptJoe3 replied to the thread Crusader 1996 454XLT Hot start problems (ECUs issue?}.
      Fred, I've been following this thread and your prior troubles back to 2023 when I was having SAME "no re-start" problem on one engine. I...
    • C
      CaptJoe3 replied to the thread Overheating issues.
      Pencils changed each oul change. Oil cooler new in last year.
    Show older items
  • Loading…
  • Loading…
Back
Top